This module has gone unmaintained and we do not have the resources to
respond to bug reports for it.
The TSC has decided to deprecate it for Zephyr v3.1 and remove it
entirely in Zephyr v3.2 unless a maintainer volunteers to keep this
module up to date and fix bugs.
This commit generates a warning at CMake time if this module is
compiled in. The warning will appear in the cmake output in the same
place that deprecated board or SoC warnings would.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We currently have mechanisms for deprecating both boards and SoCs.
However, we lack one for deprecating modules. This is inconvenient,
because we would like to do exactly that.
Handle this in a simple way by adding a new CMake file in the modules
directory which is responsible for warning the user about any
deprecated modules they may be using. See the source code comments for
more details about the approach.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
RPi Pico second stage bootloader generation seems to fail when using
Makefiles with:
gmake[2]: *** No rule to make target 'bootloader/boot_stage2.S'...
Changing the ExternalProject_Add byproduct to the actual generated file
and not the .S seems to fix the problem.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This reverts commit 619fce9e0f now that
the missing PRIuFAST32 and PRIxFAST32 macros are defined by the minimal
libc.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Problem:
pull/43494 is causing the CMake warning
No SOURCES given to Zephyr library: modules_hal_infineon
modules_hal_infineon library was defined even if none of the
below subdirectories is added; so, when not building for
Infineon/Cypress devices, the source list for this library
will be empty.
Fix:
Added 'zephyr_library_named(modules_hal_infineon)' under condition
'if(CONFIG_HAS_XMCLIB OR CONFIG_SOC_FAMILY_PSOC6)'
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Refactor iMX RT pin control support to use more generic names, as the
IOMUXC peripheral is present on non RT iMX application cores.
Additionally, make selection of the pin control driver occur at the SOC
level.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Previously val_nspe.a, pal_nspe.a, test_combine.a created under tfm binary
directory (${TFM_BINARY_DIR}/app/psa_api_tests/) now from TFM 1.6 it is
generated to the respective tfm binary directory with parent directory
(${TFM_BINARY_DIR}/tf-m-tests/app/psa_api_tests), update the CMake
accordingly.
Signed-off-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@linaro.org>
Refactor help text for TFM_FLASH_MERGED_BINARY to use the standard
indentation of tab plus 2 spaces.
Reword BUILD_WITH_TFM default comment, TF-M is enabled by default, not
forced enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert the can_mode enum to a bit field to prepare for future extensions
(CAN-FD mode, transmitter delay compensation, one-shot mode, 3-samples
mode, ...).
Rename the existing modes:
- CAN_NORMAL_MODE -> CAN_MODE_NORMAL
- CAN_SILENT_MODE -> CAN_MODE_LISTENONLY
- CAN_LOOPBACK_MODE -> CAN_MODE_LOOPBACK
These mode names align with the Linux naming for CAN control modes.
The old CAN_SILENT_LOOPBACK_MODE can be set with the bitmask
(CAN_MODE_LISTENONLY | CAN_MODE_LOOPBACK).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Current Espressif porting requires standard include as
part of hal implementation. compiler_flags.cmake checks for
variant name to keep those stdinc in build.
Instead of using variant name as check, use this new CONFIG
to make it clear and to allow having toolchain integrated
in zephyr-sdk package.
stdinc dependency in hal_espressif will be worked out and removed
soon.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to bring consistency in-tree, migrate all modules code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
On non Linux system, the compilation failed because the main
CMake did not pass the CMAKE_SYSTEM_NAME to the bootloader's
CMake. This caused the variable to be empty, instead of being
"Generic".
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit adds the missing common tables dependency for the SVM
functions.
The `exp_tab` and `exp_tab_f16` tables are required by the SVM
functions when the MVE is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `CMSIS_NN` Kconfig previously depended on the `CMSIS_DSP` Kconfig,
and this placed the "CMSIS-NN Library Support" prompt under the "CMSIS-
DSP Library Support" menu (note that CMSIS-DSP is a menuconfig).
Since the CMSIS-NN library, although it requires the CMSIS-DSP library,
is not a subordinate component of the CMSIS-DSP library, remove its
dependency on `CMSIS_DSP` and make it select the Kconfig symbol
instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Because Minimal LIBC doesn't have PRIuFAST32 and PRIxFAST32 which is
needed when printing traces in zcbor.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Add Kconfig configuration options which allow to configure
session caching in mbed TLS.
Note, that mbed TLS only takes care of server-side caching, the
application (socket layer) needs to implement a session storage for
client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig options to enable/disable features that are exposed in zcbor
via ZCBOR_ macros that are typically set via -D statements to the
toolchain.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Support for the can_get_max_filters() API function is optional and may
not be supported by all drivers.
The check for an adequate amount of filters is just there in order to
fail early. If the driver does not support can_get_max_filters(),
reporting of a failure will be delayed until a filter addition fails.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add initial build rules for CHRE. This change includes a Kconfig and
CMakeLists.txt to begin compiling code from the CHRE module.
Additional files are included to bridge the APIs from CHRE's to
Zephyr's. These can be found in modules/chre/include and
modules/chre/src.
Additionally, add a sample to make sure that the module builds. It can
be built via:
```
$ west build -b native_posix -p=always samples/application_development/chre
```
Signed-off-by: Yuval Peress <peress@google.com>
Previously, MCUBOOT_DATA_SHARING was enabled when BL2 was built
and when the firmware update partition was present. This is not
the only situation that you might be interested in this data
sharing. The data sharing now has it's own Kconfig.
Further, use of the firmware update partition requires data
sharing, so it selects it.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, you were required to set the image versions through the
CMake variables TFM_IMAGE_VERSION_{S,NS}. For better integration with
the rest of the zephyr build system, these are now KConfig variables
with the same name.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This commit adds a sample application demonstrating how to use
the PSA Firmware Update API from TF-M. It also enables the
`FIRMWARE_UPDATE` partition to be included at build time.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Add a Kconfig to disable non prefixed includes. By setting
`CONFIG_LEGACY_INCLUDE_PATH=n` developers can disable having
`include/zephyr` in the search path. This means that includes such
as `#include <kernel.h>` will no longer work.
Internally, every header should be updated to add the `zephyr/`
prefix to the headers. Only then, will developers be able to use
this config value for their applications.
Signed-off-by: Yuval Peress <peress@google.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
See #40591 for details, TinyCBOR (or rather the fork of TinyCBOR that we
had) is being replaced by zcbor.
Closes#40591.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add configuration for BL2 not supported. In some configurations
BL2 will not be supported. Provide a way to deselect BL2 support.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Change dependencies of the Kconfig options that enable particular nrfx
drivers so that the drivers and their instances are available when
a devicetree node with a corresponding compatible property exists,
no matter if it is enabled or not.
Change the options that enable compilation of multi-instance drivers
to be promptless helpers only (not directly configurable for users),
as they need to be enabled only together with some options that enable
particular instances of a given driver, and those options select them
as needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix crash in TF-M when non-secure IRQ is interrupting the secure
processing and using the FPU.
The FPU context must be saved when
ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is disabled since an IRQ handler
can still access the FPU registers.
Fixes: #43587
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Initial addition of the LC3 codec as a module. Usage of the module
will be seperate commits.
Even though this codec is a generic audio codec, it is tagged with
Bluetooth: as it can only be used for LE-Audio. Using the codec for
other purposes is a violation of the granted rights for the codec.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Fix TF-M nonsecure interface dispatch handling when calling secure
service before the kernel is fully active.
This fixes crash in nordicsemi_nrf53_init, which is called with
PRE_KERNEL_1, when calling soc_secure_gpio_pin_mcu_select.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The CANopenNode stack does not support CAN-FD. Depend on it being
disabled and explicitly disable it in the CANopenNode sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The filter in the testcase.yaml made it impossible for these to run.
Also, the Kconfig names for the options didn't really make much sense
so they were renamed to avoid conflict.
This fixes an issue found by #36433.
Signed-off-by: Yuval Peress <peress@google.com>
The intialization level of 802.15.4 on NET core was set to APPLICATION,
which caused some applications to break during initialization. Changed
it to POST_KERNEL. CONFIG_NRF_802154_SER_RADIO_INIT_PRIO default value
was adjusted.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Include a pointer to the CAN controller device for the CAN
transmit, receive, and state change callback functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Support function and data lookup in the RPi's ROM.
The objects are obtained by including <pico/bootrom.h> and calling
rom_func_lookup or rom_data_lookup.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Instead of including from nrfx_glue.h a specific Zephyr Bluetooth
controller header file that defines PPI and GPIOTE resources to be
reserved for exclusive use by the controller, include a file with
only a fixed name and expect the chosen Bluetooth controller to
provide the location of this file in include paths. This way, when
a different Bluetooth controller implementation is used downstream,
a different file can be easily pointed to.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for TF-M and BL2 image size reports.
This adds the following targets when TF-M or BL2 is enabled:
tfm_rom_report, tfm_ram_report, tfm_footprint
bl2_rom_report, bl2_ram_report, bl2_footprint
Example:
west build -t tfm_rom_report
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In upstream the LV_COLOR_DEPTH_BITS option is called LV_COLOR_DEPTH, this
needs changing if we want to support v8.2.0.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add KConfig symbols to select power management HAL drivers required for low
power modes. Set ZTEST_NO_YEILD if PM is enabled, since RT series SOCs
do not connect to a debugger in WAIT mode.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Currently if an attempt to disable CSMA-CA in by setting an
appropriate flag in another (for example application)
CmakeLists.txt it caused lots of warnings. This fix allows
higher level CMakeLists.txt to disable CSMA-CA without
warnings.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
This commit moves openthread CMakeLists.txt from openthread submodule
to zephyr/modules/openthread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Fixes: #40559
Moving CMakeLists.txt gluecode into Zephyr repo minimizes the patching
needed in LittleFS repo.
It provides a dedicate Zephyr LFS config header which will define the
equivalent LittleFS settings based upon Kconfig settings.
This further reduces the patching needed in LittleFS.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
LittleFS requires a `lfs_crc()` function, however the basic crc
function provided by LittleFS gets disabled when a custom configuration
header is used.
To ensure identical crc behavior let Zephyr have a copy of the basic
lfs_crc.
This allows to ensure identical behavior when moving glue code into
Zephyr repo, and allow us to change to an existing crc implementation
provided natively by Zephyr at a later time.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There are several Kconfig symbols defined in the lvgl module that are
referenced from various defconfigs in the zephyr tree. If the LVGL module
is unavailable, they need to be redefined as stubs in Kconfig.lvgl.
Fixes: 6c190292c0 ("lvgl: move the lvgl glue out of the zephyr tree")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
The nrf_802154_lp_timer_zephyr.c platform file is unused in the
opensource SL library variant.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Start using the upstream Kconfig from LVGL and move the glue code out
of the zephyr tree and put it under lvgl/zephyr/ in modules.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Change the CPU_CORTEX_R kconfig option to CPU_AARCH32_CORTEX_R to
distinguish the armv7 version from the armv8 version of Cortex-R.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Parameter `prio` of `nrf_802154_irq_init` is now allowed to have
negative value what means use of ZLI priority or highest possible
priority if ZLIs are disabled.
Signed-off-by: Andrzej Kuros <andrzej.kuros@nordicsemi.no>
Add config to disable all TF-M output. This configuration is needed
in order to exclude the UART driver through a select in Kconfig
when either the code size optimization or the UART instance requires it.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added basic support for the RP2040 SoC. Support
includes booting and starting the kernel, on one
core only.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This update updates the TraceRecorder module from version v4.5.2
to v4.6.0(RC1). The primary motivation for this update is to
fix some breaking trace hook changes introduced into Zephyr
v2.7.99, which resulted in compilation errors when using the
TraceRecorder module.
The update to v4.6.0 also introduce Snapshot tracing support,
extended kernel object naming, and a reworked configuration
scheme with better naming and layout in guiconfig.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Use the set of headers that the TF-M build system places in the
install output. Not all public header files are available in the
interface/include directory and the TF-M build system uses the install
mechanism of cmake to include additional headers based on platform
or configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
MCUX usb ISR was making usb callbacks directly, which caused assertion
failures when a callback attempted to lock a mutex. Move USB callback
handler to separate thread, and make ISR notify thread via message
queue.
Fixes#40638
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
GPC driver is used for power management operations on RT series SoCs.
Enable inclusion of the driver into the build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Provide a _ns target for b_u585i_iot02a board.
Flash partition is given as default for most applications,
with the following sizes:
MCUBoot: 208K
Secure: 256K
Non secure: 512K
Tested using tfm_ipc sample.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Increase the default CANopenNode stack sizes a bit. The current stack
sizes are too small for e.g. ST STM32F3, likely other platforms as well.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add Kconfig option for indicating that a given SoC contains the NXP
MCAN CAN FD controller.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit aligns nrf_802154_lp_timer_zephyr platform to new API of
nrf_rtc_timer. Moreover, it implements lp_timer synchronization
functions using the new nrf_rtc_timer API.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
In TF-M 1.5 some defaults changed. Some of our CMake code was
unfortunately making assumptions about the defaults.
This is now rectified. The TF-M CMake variables that had their
defaults changed are now always set dependent on the Kconfig values
and we no longer leave the CMake variables unset and with default
values.
A cleanup will be done later to not rely on default values for all
variables. This patch only fixes the defaults that have changed.
Also, TFM_PSA_API is removed as it is now an internal variable.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit aligns nrf_802154_lp_timer_zephyr platform to new API of
nrf_rtc_timer. Moreover, it implements lp_timer synchronization
functions using the new nrf_rtc_timer API.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This patch restricts access of CCA configuration related macros to
builds for which nRF 802.15.4 Radio Driver is enabled. This reduces
clutter and prevents misuse of CCA macros.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
Add two Kconfig variables for controlling the size and
the number of assets to be stored in Internal Trusted
Storage (ITS).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Fix copy-paste mistake in SPM log level silence configuration, PARTITION
should be SPM in order to correctly silence SPM log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
MBEDTLS_ECP_MAX_BITS is now set automatically by mbed TLS, redefining it
in the config file ends up in compilation warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds a driver using the SNVS high power and optionally low power
RTC instances. A device specific function `mcux_snvs_rtc_set` is
provided to update the current counter value.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Switch from using can_configure() to using can_set_mode() for disabling
CAN controller transmissions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move all defines that specifies (D)PPI resources which are used
to dedicated files which have no include dependencies. This allow
to use them in nrfx_glue.h to specify fixed (D)PPI channels used
by the bluetooth.
Additionally, added mask with GPIOTE channels used by the bluetooth
controller. It was previously not defined which could lead to
conflicts since same channels could be allocated by the nrfx_gpiote
user
Updated nrfx_glue.h to use new approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Set NRF_SKIP_FICR_NS_COPY_TO_RAM for nrf53 and nrf91 until corresponding
memory region is excluded from use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx v2.6.0.
nrfx 2.6.0 includes extended API in nrfx_gpiote which can be
used by the zephyr shim.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mcuboot's bootutil libraries has option to use hooks which
allows to customize its behavior while proceeding on images
date. This patch introduces configuration options required for
enabling that option.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Use nrfx_gpiote and nrfx_ppi allocators to allocate channels
at runtime instead of fixed, device-tree based allocation which
is harder to maintain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds UCPD HAL and LL drivers to the Kconfig system
required to enable USB Power Delivery interface (UCPD)
on STM32G0/G4/L5/U5 devices
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The TFM build directory path is hardcoded in many places.
In order to support out-of-tree secure partitions the output path
has to be known in potentially out-of-tree build scripts.
This could potentially break out-of-tree build scripts if the
location of the build directory was changed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a pin control driver for GD32 SoCs using the AFIO model.
Thanks to Gerson Fernando Budke for testing and implementation
suggestions.
Co-authored-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix issue with TFM signing of images not using the correct imgtool.
The wrapper command expects the mcuboot scripts folder to be the
current working directory when called in order to find its own
version of imgtool.
Since the command is using a different current working directory
this is not found and the system imgtool is used instead.
This causes the commands to be run with 2 different version of imgtool
if the system imgtool is found and does not have any issues.
The system imgtool could not be installed or have compatibility issues
as 1.7.2 version of imgtool is currently required by the wrapper script
Fixes: #40254
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This rework module hal_gigadevice to be compliance with rule
that requires firmware libraries directories names be lowercase.
This rule was created at hal_gigadevice/README and it is not
a Zephyr general rule. This only affect how hal_gigadevice is
used.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
GD32F4XX requires access to SoC definitions (e.g. GD32F450) when
including library header files, so expose them at Zephyr level.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix cmake warnings for TF-M build system when PSA tests are not enabled.
This produces the following warnings:
"
CMake Warning:
Manually-specified variables were not used by the project:
PSA_TOOLCHAIN_FILE
TOOLCHAIN
"
These warnings can point to cache or config variables being updated in
the TF-M build system so keep this free of warnings.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update crypto modules prompt strings to follow the Kconfig guidelines.
"For a Kconfig symbol that enables a driver/subsystem FOO, consider
having just “Foo” as the prompt, instead of “Enable Foo support” or the
like."
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The ASSYMETRIC crypto module has been split in two, for sign and
encrypt. Update Kconfig entries to match.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove CRYPTO_GENERATOR_MODULE Kconfig which has been removed.
Its features are covered by TFM_CRYPTO_KEY_MODULE and
CRYPTO_KEY_DERIVATION_MODULE.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set a thread name for the tx_workq thread, so that it shows up in
"kernel stacks" when the shell or thread debugging are enabled.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
So far maximum PSK length was configured by mbedTLS as 32 bytes.
Introduce Kconfig option that will configure it instead of relying on
default value from mbedTLS library, so that user can easily adjust that
value to application needs.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Split the zephyr project maintained repository trusted-firmware-m into
forks of the individual upstream repositories.
https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git
Upstream: TF-Mv1.4.1
Additions:
zephyr: module: Add zephyr module file
trusted-firmware-m: platform: lpcxpresso55s69: Update SDK
https://git.trustedfirmware.org/TF-M/tf-m-tests.git
Upstream: 51ff2bdfae043f6dd0813b000d928c4bda172660
Additions:
zephyr: module: Add module file for tf-m-tests
https://github.com/ARM-software/psa-arch-tests.git
Upstream: 60faad2ead1b967ec8e73accd793d3ed0e5c56bd
Additions:
zephyr: module: Add module file for psa-arch-tests
psa-arch-tests: Allow overriding of toolchain file
The organization of folders remain the same with the following
exceptions:
Moved:
root folder moved from modules/tee/tfm to modules/tee/tf-m to avoid
problems with west update.
zephyr/module.yml to trusted-firmware-m/zephyr/module.yml and
${ZEPHYR_TRUSTED_FIRMWARE_M_MODULE_DIR} points to what was previously
${ZEPHYR_TRUSTED_FIRMWARE_M_MODULE_DIR}/trusted-firmware-m.
Added:
psa-arch-tests/zephyr/module.yml and ${ZEPHYR_PSA_ARCH_TESTS_MODULE_DIR}
tf-m-tests/zephyr/module/ and ${ZEPHYR_TF_M_TESTS_MODULE_DIR}
Removed:
init-git.sh
README.rst
Fixes: #39353
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the zephyr module dir variable for the trusted-firmware-m root
folder. Update documentation to TF-M documentation in
tfm-secure-boot.rst.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The previous CONFIG_CAN_MAX_FILTER is specific to certain drivers.
Using the new API makes the CAN open driver independent of the used
CAN hardware / driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add the inclusion of the Common Peripheral Access Layer for aarch32
Cortex-A SoCs in combination with the respective SoC's header file,
in which the feature flags evaluated in core_ca.h must be provided.
The corresponding CMSIS include path is added to the build by setting
the HAS_CMSIS_CORE_A Kconfig item for all aarch32 Cortex-A CPUs.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@Weidmueller.com>
This add access to modules/hal/gigadevice with three firmware
libraries by updating west.yaml file:
- GD32E10X ARM (Cortex-M4F)
- GD32F403 ARM (Cortex-M4F)
- GD32VF103 RISC-V (Nucleisys Bumblebee core)
It introduce module/hal_gigadevice, which contains all Cmake
and Kconfig rules to build GigaDevice SoCs into zephyr main
tree.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Fix configuration options for TF-M log levels configured to an empty
string when not defined. This can happen when none of the options
have been selected due to dependencies not being met.
For example when TFM_MINIMAL=y then TFM_PARTITION_LOG_LEVEL will not be
defined.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Issue #38643
Introduce a more powerful and well established mocking framework
into Zephyr. It also allows running the actual FFF tests using the
zephyr SDK and ztest framework to ensure compatibility.
As per TSC meeting, the fff.h header was directly added to
subsys/testsuite/include/. As per the guidelines, the file is exactly
the same as it is in FFF's library, but re-styled with clang-format.
The west.yml entry was added using the "ci" group and filtered by
default. (note that the tests will break until the CI actually
specifies that the group is needed).
Signed-off-by: Yuval Peress <peress@google.com>
Use the Mbed TLS module, expecting the upstream directory layout rather
than the nested directory we've been using before.
Signed-off-by: David Brown <david.brown@linaro.org>
Add Kconfig options for configuring TF-M log options.
- Partition log level
- SPM log level
- Exception info dump
Set log level to "info" which is the default in upstream TF-M.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove duplicated setting of TF-M CMakeCache.txt entry TFM_BOARD.
In addition it is also wrong since the CONFIG_ prefix is missing.
Leftover from: 583d5a6db3
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't build TF-M in parallel on Windows as it has been reported to
expose dependency issues with the TF-M build system.
These issues will be investigated at a later time.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use ZEPHYR_<MODULE>_MODULE_DIR instead of relative paths. Moving the
module folder would otherwise break the build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mbed TLS 3.0 changes the configuration defines used to determine the
buffer size used for TLS. We were still setting the old one, which was
causing Mbed TLS to revert back to the large default buffer size. Set
both the in and out buffer sizes to match the config setting. A future
improvement may be to separate this into two configurations within the
Zephyr config.
Signed-off-by: David Brown <david.brown@linaro.org>
The psa-arch-tests project changed how third-party toolchains are
integrated. This broke the Zephyr sdk.
This patch aligns with the new mechanism.
https://github.com/ARM-software/psa-arch-tests/pull/276
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
-The current scheme in zephyr has the two choices MBEDTLS_BUILTIN
and MBEDTLS_LIBRARY, but the choice of MBEDTLS_LIBRARY requires
setting CONFIG_MBEDTLS_INSTALL_PATH for includes and library linking.
This may not be neccesary when an alternative implementation of the
library is being used. This adds support for custom choices in
MBEDTLS_IMPLEMENTATION which can be added in an out-of-tree Kconfig
file.
-Made else an elseif(CONFIG_MBEDTLS_LIBRARY.
-Removed reduntant assertion between the two choices.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
No sources were ever added to the `zephyr_library()` defined in
modules/hal_nxp/usb/CMakeLists.txt, thus removing this lib to avoid
the warning:
> No SOURCES given to Zephyr library: modules__hal_nxp__usb
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds FMAC HAL and LL drivers to the Kconfig system
Required to enable Filter Math Accelerator (FMAC)
on STM32G4/H7 devices
Signed-off-by: Tom Owen <tom.owen@zepler.net>
The TF-M build is passed a path to the mbedtls project
directory, however, NCS has its own mbedtls variant. When
building with TF-M we use a generator expression to allow
setting the path to mbedtls from nrf_security.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit updates the CMSIS-DSP configurations for the CMSIS-DSP
1.9.0, which is part of the CMSIS 5.8.0 release.
Note that the Helium/MVE configurations are removed because CMSIS-DSP
now automatically selects them if available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add nrf51 MDK defines needed to correctly select the nrf51 erratas
needed on the specific SoCs. The nrf51_erratas.h header file only uses
these defines to check which erratas should be applied.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig options that allow users to select the way the APPROTECT
mechanism is handled in the SystemInit() function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Updates west manifest and module folder name to point to new
TensorFlow Lite Micro repo Google recently pulled out of
the TensorFlow repo.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Update zephyr side to handle hal_nxp using cmake-ext/kconfig-ext. This
allows for having zephyr specific integration code live with the zephyr
source tree.
For now on the cmake side we just use add_subdirectory() of the hal_nxp
repo so the integration is effectively transparent.
For Kconfig we add a place holder Kconfig file since the hal_nxp repo
doesn't have any Kconfig files in it currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit reworks nRF IEEE 802.15.4 temperature update module to save
resources, otherwise used to create thread, by using work queue.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
A new configuration is available in TF-M, for disabling RNG
independent from key derivation. Introduce a corresponding
Kconfig option to control the RNG API enabling/disabling from
Zephyr.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow developers the option of using the DOWNLOAD option
for MCUboot in TF-M bulds with BL2. Using MCUboot from
Zephyr is still the default option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TFM_MCUBOOT_IMAGE_NUMBER Kconfig option should have
a dependency on TFM_BL2, since it is not applicable
otherwise.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the tfm-mcuboot module in Zephyr (which hosts the
mcuboot version that is used for TF-M builds in Zephyr). We
will force TF-M builds in Zephyr to use the MCUboot version
that any Zephyr builds are using. This will allow Zephyr to
maintain a single mcuboot module version in its default
manifest.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For TF-M builds on LPCXPRESSO55S69 we set the path to the
NXP HAL sources that are required for building TF-M for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Upstream TF-M has modified the path name for ARM platforms,
so we fix the board names in the module integration code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds temperature platform used by the IEEE 802.15.4 Radio
Driver. The new platform requires an enabled temperature sensor.
The new hal_nordic revision updates the nRF 802.15.4 component.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
This commit introduce new HAL Telink module used by
new Telink B91 RISC-V platform drivers.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `bl5340_dvk_cpuappns`
to `bl5340_dvk_cpuapp_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add Kconfig option for indicating that a given SoC contains the NXP
Kinetis Reset Control Module (RCM).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since we now have separate Kconfig symbols for the different
MPS2 AN521 board variants, we need to update the BOARD switch
for the TF-M target on MPS2 AN521.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current CMakeLists.txt contains a function that is called from
the same file.
This patch removes the abstraction, allowing to remove many
lines of parameter handling.
Additionally, with this patch, the Cmake argument handling is now
done via a list, which removes many more named variables.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
- Fixed some incorrect streamport references that pointed to the
base streamport files instead of those dedicated for Zephyr.
- Updated the source file compilation to match the updated
TraceRecorder module.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the LoRaMac-node library to the last stable release and fix
the Zephyr glue code to match it. Move CMakeLists.txt to the main
Zephyr repository to simplify loramac-node module maintenance.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
The CMake variable `TFM_ISOLATION_LEVEL_ARG` was not properly set when
application configures higher isolation level. This led to isolation
level always being to set 1.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Fixes: #36101
The move of CMake invocation to a dedicated custom target, see #34868
results in tfm_cmake to always be considered out-of-date, causing CMake
to be reinvoked in the TF-M Binary dir, which again results in the
build command to rebuild.
This commit moves the invocation to a custom command with the
CMakeCache.txt as output. The custom target tfm_cmake is updated to
depend on CMakeCache.txt.
This mean that CMake for TF-M will only be invoked inside the Zephyr
build command if that file is missing.
If the CMakeCache.txt file is updated or TF-M CMake or source code is
modified, then the build command inside the TF-M build folder will
ensure correct re-run of CMake from within the TF-M build folder.
This ensures that TF-M will still rebuild if TF-M code is modified,
while at the same time avoid unnecessary rebuilds of TF-M code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We do not need the if BUILD_WITH_TFM guard in the main
Kconfig file, as the guards are present insude the respective
Kconfig files that are sourced by the main Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M project is higly configurable and we end up having
a growing number of Kconfig option definitions in the main
Kconfig file. This commit splits out the configuration options
for the TF-M partition and for the crypto partition configuration
into separate Kconfig files, for ease of reading. The commit
does not introduce behavioral changes.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Also, this eases readability.
The new API can be used any time all FP registers must be manually
saved and restored for an operation.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
When running with TFM Regression option set, but without
BL2 (MCUboot) we need to use the TF-M's NS binary, and not
the Zephyr application. This was selected properly for the
case with MCUboot boot already, but not when running the
regression tests without MCUboot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These are needed to disable not needed crypto modules in
the trusted-firmware-m module.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Zephyr SDK is not supported on OS X, however, Zephyr toolchain can be
built on OS X using Crosstool-NG.
Currently, trusted-firmware-m CMakeLists.txt only supports `zephyr` and
`gnuarmemb` toolchains which prohibits building TF-M on OS X using
Zephyr toolchain built with Crosstool-NG.
docs:
https://docs.zephyrproject.org/latest/getting_started/toolchain_3rd_party_x_compilers.html#crosstool-ng
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
The caller saved registers were restored both as caller saved and
callee saved registers, i.e. register 0-15 were restored into
both register 0-15 and 15-31.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Currently the MBEDTLS_HAVE_TIME_DATE mbedTLS option is enabled based on
the CONFIG_POSIX_API option. This doesn't seem right, since the enabling
the POSIX API does not guarantee that there is a valid time source in
the system. This was the case for the qemu_x86 platform, where enabling
POSIX_API caused TLS handshake failures due to certificate validation
errors caused by no valid time avaialble in the system.
Fix this by adding a specific KConfig entry for date/time configuration
in mbedTLS. Applications that need to enforce date verification in
mbedTLS should enable it explicitly instead of relying on the
non-obvious implicit configuration.
Fixes#35401
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The nRF SOCs declare support for SWO using the HAS_SWO define. In
addition, the SWO pin has to be configured at runtime, which is done
through the Nordic HAL by defining ENABLE_SWO.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Follow-up: #34868
The CMAKE_ARGS was accidentally lost during work on #34868.
This commit fixes that by re-adding `CMAKE_ARGS` as multi value arg.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #34843
This commit is a followup to PR #34843.
The Zephyr subsys/tracing/Kconfig file has a
`depends on ZEPHYR_TRACERECORDER_MODULE` but that symbol is only
available when the module is part of the manifest.
This commit adds the second part of the comment:
https://
github.com/zephyrproject-rtos/zephyr/pull/34843#discussion_r628154265
To ensure all Kconfig symbols are defined.
Without this commit, users without TraceRecorder will see following
checkpatch error:
```
ERROR : Test KconfigBasic failed: Undefined Kconfig symbols:
warning: undefined symbol ZEPHYR_TRACERECORDER_MODULE:
- Referenced at subsys/tracing/Kconfig:35:
config PERCEPIO_TRACERECORDER
bool "Percepio Tracealyzer support"
select THREAD_NAME
select INIT_STACKS
select THREAD_MONITOR
depends on ZEPHYR_TRACERECORDER_MODULE && <choice>
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Now using CONFIG_MBEDTLS_USER_CONFIG_FILE instead of
CONFIG_MBEDTLS_USER_CONFIG_ENABLE for inclusion of user config file.
The Kconfig MBEDTLS_USER_CONFIG_ENABLE setting now now determines if
MBEDTLS_USER_CONFIG_FILE is visible.
This removes the problem of MBEDTLS_USER_CONFIG_FILE to be stuck on its
first value.
Users can use MBEDTLS_USER_CONFIG_ENABLE to get the prompt and define
their own value.
As the CONFIG_MBEDTLS_USER_CONFIG_FILE is default promptless then we can
use this setting directly as it will only be defined if another Kconfig
file specifies a default value to use, or user enables:
MBEDTLS_USER_CONFIG_ENABLE.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the prompt from MBEDTLS_USER_CONFIG_FILE unless
MBEDTLS_USER_CONFIG_ENABLE is true.
This fixes issues where other parts would specify a default value for
MBEDTLS_USER_CONFIG_FILE that would become stuck and not updated if
user re-configured the system using menuconfig.
Disabling the prompt ensures that only when a user specifically enables
MBEDTLS_USER_CONFIG_ENABLE and specify a custom user value in
MBEDTLS_USER_CONFIG_FILE the setting will be fixed.
Also updates the manifest with related change in the mbedtls project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
