* Rename CPU_ARCV2 to ISA_ARCV2. That helps to avoid conflict between
CPU families naming and ISAs naming and aligns this options
with other ARC OSS projects.
* Generalize ARCV2 check to ARC check where it is required.
NOTE: we add ISA_ARCV2 option in a choice list as a preparation
for ISA_ARCV3 addition.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Don't allow user to choose CPU_ARCEM / CPU_ARCHS options
but select them when exact CPU type (i.e. EM4 / EM6 / HS3X/ etc)
is chosen.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
As of today during the Zephyr start we
- invalidate I$
- disable I$
- enable I$
Given that we don't need to have I$ disabled during any
initialization period and ARC processors have caches enabled
after reset the I$ disabling/enabling is excessive, so we can
drop it.
By that we also aligh the I$ initialization on ARC with other
projects like U-boot and Linux kernel.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
As we have removed MPU_STACK_GUARD for ARC_MPU_VER 2, we also
need to remove ARCH_HAS_STACK_PROTECTION for boards with
ARC_MPU_VER 2 and no hardware stack checking, relative commit:
commit(arch: arc: remove MPU_STACK_GUARD for ARC_MPU_VER 2)
in pull request #24021
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
ARC mpu version used a wrong number 3, could cause conflict in future.
This commit fix this issue to version number 4.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Remove duplication in the code by moving macro LOCKED() to the correct
kernel_internal.h header.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Both _IRQ_VECTOR_TABLE_SECTION_NAME and _SW_ISR_TABLE_SECTION_NAME
are defined with asterisk at the end in an attempt to include
all related symbols in the linker script. However, these two
macros are also being used in the source code to specify
the destination sections for variables. Asterisks in the name
results in older GCC (4.x) complaining about those asterisks.
So create new macros for use in linker script, and keep
the names asterisk free.
Fixes#29936
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The new APIs are not only dealing with cache flushing. Rename the
Kconfig symbol to CACHE_MANAGEMENT to better reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The kconfig options to configure the cache flushing framework are
currently living in the arch-specific kconfigs of ARC and X86 (32-bit)
architectures even though these are defining the same things.
Move the common symbols in one place accessible by all the architectures
and create a menu for those.
Leave the default values in the arch-specific locations.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
ATOMIC_OPERATIONS_BUILTIN still has some problem in mwdt toolchain,
so choosing ATOMIC_OPERATIONS_C instead.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
accessing the stack below guard_end is always a bug. some
instrustions (like enter_s {r13-r26, fp, blink}) push a collection
of registers on to the stack. In this situation, the fault_addr will
less than guard_end, but sp will greater than guard_end.
|------stack base-------| <--- high address
| |
| | <--- sp
|------stack top--------|
|------guard_end--------|
| | <--- fault_addr
| |
|------guard_start------| <--- low address
So we need to remove the SP check. Trade-off here is if we prefer
'false' classifications of MPU stack guard area accesses as stack
error or as general mpu error. The faults get caught anyway, this is
just about classification: don't see a strong need for the extra check
to only report stack pointer accesses to guard area as stack error,
instead of all accesses.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to the PRMs of both ARC EM & ARC HS families on entry
to Fast IRQ handler ARC hardware saves PC (Program Counter) value
of where processor was right before jumping to the IRQ handler into
2 registers: ILINK & ERET.
But it turned out in case of ARC HS (at least in configuration with
Fast IRQs & 1 register bank) only ILINK was populated with the
previous PC, while in Zephyr we relied on what we read out of ERET.
That lead to funny issues when CPU returned from IRQ handling
to some unexpected location.
And now with that precious knowledge we're switching to return
address recovery from ILINK so that with both families of ARC
processors (EM & HS) we may get reliably good results.
The wrapper is few cycles shorter/faster as well, as we may shave off
another extra instruction for transferring ERET value from its AUX reg
to a scratch core register to be later stored in the memory.
+----+---------------+---------------+--------------+
| | FIRQ | RIRQ | RIRQ(Secure) |
+----+---------------+---------------+--------------+
| HS | ILINK=PC | ILINK=PC | NULL |
+----+---------------+---------------+--------------+
| EM | ILINK=ERET=PC | ILINK=ERET=PC | ILINK=PC |
+----+---------------+---------------+--------------+
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Handle the difference of GNU & MWDT assembly for ARC-specific
code guarded by CONFIG_SMP define. That fixies SMP platforms build
with MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
align kconfig option CONFIG_ARC_CUSTOM_INIT to
CONFIG_INIT_ARCH_HW_AT_BOOT. Remove unused CONFIG_ARC_CUSTOM_INIT in
kconfig.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
The Inter-core Debug Unit provides additional debug assist features in
multi-core scenarios.This commit allows ARConnect to conditionally
halt cores during debugging.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
There is a register misuse in leaving tickless idle code, which would
destroy exception/interrupt status. This commit fix this issue.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
In old version nSIM, when cpu is sleeping, no response to
inter-processor interrupt although it's pending and interrupts
are enabled(SNPS JIRA issue P10019563-41294). Now this has
been fixed in nSIM version (2020.09), so we can safely remove it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
EMSK boards can't be reset between tests due to hardware configures.
MPU v3 configs in previous test could cause exceptions in the following
tests. This commit fixes this issue by restoring MPU registers initial
states at early init stage.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Previously MPU registers macros are only defined within its own header
files and could not be used by other part of program. This commit unify
them together.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
"arch_switch" is declared as an inline function in kswap.h,
it should be a wrapper of arch level switch. The difference
of declaration and implementation of "arch_swich" causes
warning from MWDT compiler.
Use "arch_switch" with proper declararion (which is just
wraper for "z_arc_switch") to do conext switch for ARC.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Make the assembly codes compatible with both GNU
and Metaware toolchain.
* replace ".balign" with ".align"
".align" assembler directive is supposed by all
ARC toolchains and it is implemented in a same
way across ARC toolchains.
* replace "mov_s __certain_reg" with "mov __certain_reg"
Even though GCC encodes those mnemonics and even real
HW executes them according to PRM these are restricted
ones for mov_s and CCAC rightfully refuses to accept
such mnemonics. So for compatibility and clarity sake
we switch to 32-bit mov instruction which allows use
of all those instructions.
* Add "%%" prefix while accessing registers from inline
ASM as it is required by MWDT.
* Drop "@" prefix while accessing symbols (defined in C
code) from ASM code as it is required by MWDT.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
/#
GNU toolchain and MWDT (Metware) toolchain have different style
for accessing arguments in assembly macro. Implement the
preprocessor macro to handle the difference.
Make all ASM macros in swap_macros.h compatible for both ARC
toolchains.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
* Move switched_in into the arch context switch assembly code,
which will correctly record the switched_in information.
* Add switched_in/switched_out for context switch in irq exit.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Saves us a few bytes of program text on arches that don't need
these implemented, currently all uniprocessor MPU-based systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All of these should be no-ops for the following reasons:
1. User threads cannot configure memory domains, only supervisor
threads.
2. The scope of memory domains is user thread memory access,
supervisor threads can access the entire memory map.
Hence it's never required to reprogram the MPU on the current CPU
when a memory domain API is called.
This does not address the issue #27785 if a user thread in the domain
is running on some other CPU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Use CONFIG_TRACING_ISR to exclude tracing ISRs just like other
architectures.
Also, z_sys_trace_isr_exit was not defined (It was renamed some time ago
and this was forgotten...)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
unify how XIP is configured across architectures. Use imply instead of
setting defaults per architecture and imply XIP on riscv arch and remove
XIP configuration from individual defconfig files to match other
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MISRA-C wants the parameter names in a function implementaion
to match the names used by the header prototype.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This interface is documented already in
kernel/include/kernel_arch_interface.h
Other architectural notes were left in place except where
they were incorrect (like the thread struct
being in the low stack addresses)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch_new_thread() passes along the thread priority and option
flags, but these are already initialized in thread->base and
can be accessed there if needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rewrite 'exit_tickless_idle' macro to make code more readable.
No functional changes intended.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Switch nSIM from custom ARC UART to ns16550 model. That will
allow us to use zephyr images built for nSIM on other platforms
like HAPS, QEMU, etc...
This patch do:
* switch nSIM board to ns16550 UART usage
* change nSIM simulator configuration to use ns16550 UART model
* drop checks for CONFIG_UART_NSIM in ARC code
* update nSIM documentation
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
* The stack pointer (SP) register points to the lowest-used address of
a downward-growing stack, so memory address [sp] is used, we can't
modify it.
* In firq_no_switch case, we need to pop sp, which pushed before
_isr_demux function in firq_nest function.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The ESF contains register file contents including program
counter when the exception happened. If non-NULL and we
have ARC_EXCEPTION_DEBUG enabled, dump its contents to the
log stream.
Other arches do this already.
There is no need to read ERET, the ESF already contains the
interrupted PC value.
A future enhancement could create an option to additionally
push callee-saved register context into the ESF so it can
also be dumped out, but this patch does not address this.
A future enhancement could also convert the syscall
stack frame pointer passed to arch_syscall_oops() into
an ESF so that context of the failed system call can be
inferred.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Because the issue of nsim, the sleep instruction doest not work
correctly when SMP is enabled. A workaround is introduced in commit
d56a12d955, this workaround should be enabled only for SMP case in
nsim.
For other cases, no need of this workaround.
This commit fixes#24276
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
ARC_MPU_VER 2 has a strong requirement in
* size, must be >= 2048 bytes and power of 2
* start address must be aligned to size
It may bring a big waste of memory.
On the other hand, GEN_PRIV_STACK is used for ARC_MPU_VER 2,
it conflicts with MPU_STACK_GUARD.
So considering the limmitations, remove MPU_STACK_GUARD for
ARC_MPU_VER 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Because ARC MPUv3 doesn't have a strong alignment requirement
as ARC MPUv2 does, no use of GEN_PRIV_STACK for it.
Without GEN_PRIV_STACK, all stack elements can be in one stack object.
See #24048.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
drop the original C macro based allocation of privilged stack as
it may cause the waste of memory for ARC MPUv2.
now use the way of GEN_PRIV_STACK to generate privilege stack as
other archs did, e.g. ARM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit cleans up the section name definitions in the linker
sections header file (`include/linker/sections.h`) to have the uniform
format of `_(SECTION)_SECTION_NAME`.
In addition, the scope of the short section reference aliases (e.g.
`TEXT`, `DATA`, `BSS`) are now limited to the ASM code, as they are
currently used (and intended to be used) only by the ASM code to
specify the target section for functions and variables, and these short
names can cause name conflicts with the symbols used in the C code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel z_setup_new_thread() calls into arch_new_thread(),
which calls back into the core kernel via z_new_thread_init().
Move everything that doesn't have to be in z_new_thread_init() to
z_setup_new_thread() and convert to an inline function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This bug is brought in commit 3f88ddd54999.
The cleanup of IRQ_ACT.U bit before thread switch is not done.
The bug comes out at the case where interrupt comes in user mode,
then a thread switch happens, and the target thread is to run in kernel
mode. Because the U bit is not sync up correctly, the stack operation
is wrong.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
When SMP is enabled, the irq_lock/unlock will get and
release a global spin lock, but the codes changed in this
commit only need to lock the local cpu. No affect on
uniprocessor, but optimizations for SMP case.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add interrupt lock in low level API to gurantee the
correctness of operations.
* make some functions as in-line functions
* clean up and optimize the code comments
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
the old codes just work for single core, we need to consider
the case of SMP.
In SMP, it's not easy to get current thread of current cpu in
assembly, so we'd better do it in C.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* update comments to match latest codes
* add extra comments for some assembly, macros
* use macro to replace duplcated codes
* remove unused codes, lables, symobols
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
overhaul the thread switch code in epilogue of irq and
exception handling:
* add z_arch_get_next_switch_handle to call z_get_next_switch_handle,
let the scheduler to decide the switch thread. This will also cover
the case of SMP.
* put lots of common codes in macros for thread switch to improve
the maintainablity, readability.
* clean up of some lables to make codes easier to understand
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
for smp target, there is a case where just one core is running, then:
* during init, the master core will run, others cores will halt/sleep
* use timer driver for single core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
when MPU_GAP_FILLING is configured, the default mpu entry
(kernel read + kernel write) will be used to fill the gaps
among mpu entires to avoid dynamic mpu region splitting.
This will bring better performance in thread switch but fewer
constraints on privileged codes.
when MPU_GAP_FILLING is not configured, a sw-based mpu dynamic
region splitting is used to bypass the limitation of no mpu region
overlap in hardware. This approach will consume more hardware
mpu entries and more time in thread switch.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
arc mpu ver3 does not allow mpu region overlap, so need to enable
MPU_REQUIRES_NON_OVERLAPPING_REGIONS.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
blt is signed comparsion, if r6 is a negative number created by
malicious code, it will pass the check, bring a secure risk.
use blo (unsinged comparison) to do the check.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* for COOP_SCHED case, i.e., PREEMPT_ENABLED is not enabled, the
idle thread will block other threads which is not correct.
* remove the check of PREEMPT_ENABLED in the epilogue of irq and
exception handling. Let the scheduler (should_preempt()) decide
whether the thread should be preempted.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* remove irq lock/unlock which is not needed because of
the protection of offload_sem in irq_offload
* simplify the assembly codes related irq_offload, remove
the thread switch logic
* the old codes may do thread switch in the epilogue of
irq_offload handling with int locked, this is not correct
may cause irq_offload related codes crash.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing stack_analyze APIs had some problems:
1. Not properly namespaced
2. Accepted the stack object as a parameter, yet the stack object
does not contain the necessary information to get the associated
buffer region, the thread object is needed for this
3. Caused a crash on certain platforms that do not allow inspection
of unused stack space for the currently running thread
4. No user mode access
5. Separately passed in thread name
We deprecate these functions and add a new API
k_thread_stack_space_get() which addresses all of these issues.
A helper API log_stack_usage() also added which resembles
STACK_ANALYZE() in functionality.
Fixes: #17852
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
if USERSPACE is configured, it needs to record the user/kernel mode
of interrupted thread, because the switch of aux_sec_k_sp/aux_user_sp
depends on the aux_irq_act's U bit.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Same deal as in commit bd6e04411e ("kconfig: Clean up header comments
and make them consistent") and commit 1f38ea77ba ("kconfig: Clean up
'config FOO' (two spaces) definitions"), for some newly-introduced
stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's found that in nsim_hs_smp, sometimes the cpu
doesn't response inter-core interrupt after executing sleep
instruction.
It may be a bug of nsim, but needs more time to
investigate the root of this issue.
This commit is a workround for this, as nsim is just an
instruction simulator, no direct impact.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* necessary fixes after commit 11bd67db where ipi interrupt is used
to notify other cores to do a thread switch if necessary
* then for arc, it's needed to ignore swap_ok and check whether thread
switch is needed in the exit of irq handling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
dyn_reg_info has MPU_DYNAMIC_REGION_AREAS_NUM elements, just changing
the if check to be greater equal to this number to avoid access
MPU_DYNAMIC_REGION_AREAS_NUM element causing an out-of-bounds write.
CID: 205648
Fixes#20487
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define FP_FPU_DA in arch/arc/Kconfig to make it always available. That
way, the Kconfig.defconfig definitions can skip the type, making them
incomplete if the base definition of the symbol disappears. That makes
the organization easier to understand and errors easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CPU_EM4* and CPU_EM6 in arch/arc/Kconfig to make them always
available. That way, the Kconfig.defconfig definitions can skip the
type, making them incomplete if the base definition of the symbol
disappears. That makes the organization easier to understand and errors
easier to spot.
The help texts were taken from
https://gcc.gnu.org/onlinedocs/gcc/ARC-Options.html. Help texts for
invisible symbols can be checked in the menuconfig too if you go into
show-all mode, so they're better than adding a comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
"brk" is a break-point instruction which among other things
halts ARC core. As compared to pure halt (which is "flag 1" for ARC)
it is much more convenient as it might be executed from either
secure mode or normal mode (with SecureShield enabled), while "flag"
instruction will raise privilege violation exception if SecureShield
is enabled and we're in "normal" mode.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* implement DIRECT IRQ support both for normal irq and fast irq.
* add separate interrupt stack for fast irq and use CONFIG_ARC_
_FIRQ_STACK to control it. This will bring shortest interrupt
latency for fast irq.
* note that scheduing in DIRECT IRQ is not supported.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
after recent changes in zephyr's fault handling, e.g. use log
to repace printk, it requires more stack to exception handling, or
the stack overflow may happen and crash the system.
this commit adds a kconfig option for exception stack size with
a larger default size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* the old codes may not save the caller saved regs correctly,
e.g. r7- r12. Because the sys call entry is called in the form
of static inline function. The compiler optimizations may not save
all the caller saved regs.
* new codes use the irq stack frame as the sys call frame and gurantee
all the called saved regs are pushed and popped correctly.
* the side effect of new codes are more stack operations and a little
overhead.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* In ARC, pop reg ==> sp=sp-4; *sp= b; The original codes have bug that
the save of ilink (st ilink [sp]) will crash the interruptted stack's
content. This commit fixes this bug and makes the codes easier to
understand
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
The code in question is very non-trivial so without good explanation
it takes a lot of time to realize what's done there and why
it still works in the end.
Here I'm trying to save a couple of man-days for the next developers
who's going to touch that piece of code.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
commit 780324b8ed ("cleanup: rename fiber/task -> thread")
seems to be done by a script and in that particular case turned
menaingful sentence into nonsense. Alas, threads might be in all
four states.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anas Nashif <anas.nashif@intel.com>
We manage IRQs in a quite a different way now since
commit f8d061faf7 ("arch: arc: add nested interrupt support")
so that comment not only makes no sense but also may fool a reader
as disabling of interrupts happens in the very beginning of
_rirq_exit() but not here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
we should not rely on that eret has a copy of ilink in fast
irq handling. This will cause crash for hs cores.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For the old codes, if nest interrupts come out after _isr_wrapper
and before _check_nest_int_by_irq_act, then multi-bits in irq_act
will be set, this will result irq stack will not be switched in
correctly
As a fix, it's still need to use nest interrupt counter to do
interrupt stack switch as before
The difference is in the past exc_nest_count is used, but here
_kernel.nested/_kernel.cpus[cpu_id].nested is used.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* in arc secureshield interrupts can be configured
as secure or normal
* in sw design, high interrupt priorites are allocated to
secure world, low priorities are allocated to normal world.
* secure interrupt > secure thread > normal interrupt > normal
thead
So, here secure world/firmware only checks secure interrupt
priorities
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
it's not allowed to switch to thread preempted by exception as
its context is not saved.
So if a thread switch is required in exception handling, e.g.
kill a thread, the old thread cannot be switched back
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For arc processor equiped with secureshield, SEC_STAT.IRM
bit should be recorded, it determins which mode irq should
return
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
according to high-level design,in user mode software-triggered system
fatal exceptions only allow oops and stack check failure
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
exception, different with irq offload, may be raised interrupt
handling, e.g.
* z_check_stack_sentinel
* wrong code
we need to add specific handling of this case in exception handling
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
