At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Remove CONFIG_IPM_IMX_REV2, as this Kconfig is no longer needed. The
driver can now be enabled with CONFIG_IPM_IMX.
Update NXP HAL to remove this Kconfig as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update Zephyr fork of MCUboot to revision:
4a1effbc301fc302ecbaf40d4eb2be520b53010d
Brings following Zephyr relevant fixes:
- 4a1effbc zephyr: Remove deprecated ZEPHYR_TRY_MASS_ERASE option
- 2b924da4 samples: zephyr: Use the default MCUBoot PEM key file
- 25b7c7a8 imgtool: make "align" command line parameter optional
- 301d5655 readme: update for next dev release
- e0bdcdec Update version files for 2.0.0
- 9b92ee91 boot: zephyr: add support for LPC55Sxx
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There are a couple of important fixes without which ACPICA doesn't work
on all supported platforms.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Update the HW models module to
90f4484cbaec986ed253b4fe9649aa75e632de15
Including the following:
* 90f4484 nrf_dppi & dppi_hack: Add support for NRF_DPPI_ENDPOINT_
Note: This update requires hal_nordic/nrfx release 3.2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ESP32 flash_mmap() function requires `_rodata_reserved_start` address
to be at the beginning of RODATA. This allows adding memory-mapped flash
areas.
Fixes#52764
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update libmetal to the latest version which includes
support for the POSIX architecture.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
f7842d717c73aaeb0354f9e70e6d5ad275106f52
Including the following:
* f7842d7 INT CNTLR: Bugfix for more than 32 interrupts
* 903f643 MUTEX: Add nrf5340 MUTEX peripheral model
* e84fca4 IPC: Add nrf5340 IPC peripheral model
* dacbaa0 EGU: Minor: Use new irq ctrl API
* 9a4e0ba Templates: Add intenset/clr template for multi instance per
* c77ba72 nrf_dppi_hack: Add extra nrf like APIs meant for simulation
* 99ae791 RTC: Fix subscribe prototypes and calls from HAL
* ca554e9 FICR (53): Fix links to documentation
* d3758a2 docs: Fix links to HW sources
* 693a36c doc: Implementation status: Change checkmarks
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refactored nrfx_uarte driver uses atomic types internally,
so glue layer in TF-M needs to include them.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add generic SoC support for the supported nordic SoCs:
- nrf5340
- nrf9160
- nrf9120
Add generic SoC support by taking board specific configurations from
zephyr devicetree and kconfig.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit bumps the hal_atmel module to
revision 942d664e48f7a2725933a93facc112b87b1de32b, which is
commit number 120 on master.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Current hal only enable up to 16MB flash size in esp32s3 SoC.
This updates hal_espressif to include 32MB, 64MB and 128MB.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Pulls in the latest percepio updates that removes references to
the defunct k_pipe_block_put() routine (and k_mem_block too).
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update hal_silabs to pull request #45, fixing a file that
was copied from a wrong version.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Update to a fixed percepio tree, which allows the build to pass for valid
version numbers with 0 being one of the version number components.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
hal has to simple corrections:
- One of the asserts were obviously checking wrong condition.
It resulted in crash when asserts were enabled
- pdc module was using calloc in PRE_KERNEL_1 stage which is
not allowed. Latest Zephyr changes of default c library
triggered crash. Before calloc returned NULL and that was handled,
but now it simple returns some random data.
Now static buffers are utilized instead.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Move optional modules to a submanifest and make them optional by
default.
This is just a POC, might require some more thought. The idea is to look
at the optional manifest as an area for modules that work with Zephyr,
but not needed directly by zephyr. This could be documented somewhere
for discovery purposes allowing users to enable such modules in their
downstream if desired.
See #54276
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Pulls in the latest percepio module updates that alter how it
accesses the k_mem_slab structure (due to changes from this PR).
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update Zephyr fork of MCUboot to revision:
bf8cf46b348eb8c8c10a1f1e4a7c24cdef52acf0
Brings following Zephyr relevant fixes:
- 2929a975 bootutil: Show error if flash area open fails
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
* In Zephyr:
* The HW models now include N fake timers, and N
bst timers.
The embedded code needs to target the one for its
CPU specifically.
* Update the HW models module to
f4595802d32d103718bf50b3d390b7a450895843
Including the following:
* f459580 TEMP & ECB: Fix INTEN sideeffect prototypes
* 50c2abe nrfx_common: Fix build error with clang
* 5f0ae29 FICR: Add nrf53 variants
* 82ee9bd DPPI: On initialization, set all registers to their reset value
* 1472c34 NVMC & UICR: Readied for nrf53
* f425c08 NVMC & UICR: Refactor
* 3a4cfc2 RADIO: Parametrize ED_RSSIOFFS
* a20e9fc nrfx_get_irq_number() Add missing CCM peripheral for nrf5340net
* c199715 DPPI: Bugfix
* 93806ac Zephyr cmake: Align with nrf53 board rename
* 51f26a3 VREQCTRL: Add register stub and definitions for nrf53
* 802e0cf RADIO: Switch to level interrupts, readied for nrf53
* 49bcea2 Templates: Added shortcut check & event signaling version for s
* a880cd6 Template: Move static out of signal handler definition
* 709f82b TEMP: Switched to level interrupts, readied for nrf53
* 6ef0069 AES_CCM: Switched to level interrupts, readied for nrf53
* eaa89da RNG: Use common templates
* 75a6cb4 AAR: Switched to level interrupts, readied for nrf53
* fbf58f3 AES_ECB: Switched to level interrupts, readied for nrf53
* d084647 RNG: Bugfix in STOP subscription
* 8007318 Templates: Added template code for the most common models logic
* bab6a54 int ctrl: Added new API
* daaaaa0 config: Fix nrf53 Net core EGU instance HAL mapping
* 54570a0 nrf5340 RTC int mapping fix
* 043af26 nrfx_common: Provide nrfx_get_irq_number() for 5340 cores
* ecd7b9b SWI: Add SWI pseudo peripheral
* a70c73b CLOCK: Add missing TASK sideeffecting prototypes, and fix typo
* 56c7581 nrf5340: Split HAL files in net and app sets
* 3892d3e Add API to get the MCUs/domains names
* 8f485bc RADIO: Prevent clang build warning
* 5aac1c2 hal: Build weak version of the HAL for the 53 series also
* f18422d standalone nrfx_config: Provide needed definitions for nrf53
* 4015d5a nrfx_glue_bsim: Provide 2 trivial definitions for standalone bu
* 4af80d5 cmsis stubs: Provide trivial macro to replace ISB
* b6c2769 cmsis replacements: Fix for other Zephyr bsim targets
* 8316930 zephyr CMakefile: Set HAL version based on Kconfig
* 4404106 RNG: Rename functions to match new naming convention
* a3dbb38 RTC: Rename functions to match new naming convention
* 886dc73 CLOCK: Rename functions to match new naming convention
* bcb2b99 EGU: Rename functions to match new naming convention
* 50af67e TIMER: Rename functions to match new naming convention
* 8120224 CLOCK/POWER/RESET: Add DPPI connections, generalize to N instan
* 450337c RTC: Add DPPI connection, nrf53 support and new functionality
* 2918ce6 DPPI common subscription: Minor API change
* ec1c2a7 TIMER: Add DPPI connection, nrf53 support and functionality
* e6f9860 EGU: Add DPPI connection, nrf53 support and generalize
* c8a4368 bst_ticker: Generalize to N instances
* 093deee fake timer: Generalize to N instances
* 302da8d DPPI: Typo fix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Take in a minor fix necessary to run 15.4 on the
incoming simulated nrf53 targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This PR fixes the espressif esptool to deal with ELF section alignment
which would otherwise create holes in the resulting binary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Update Zephyr fork of MCUboot to revision:
ae2aeedfe8bb66f7fdddc25271689144d3579959
Brings following Zephyr relevant fixes:
- 268433e zephyr: Allow user-defined boot serial extensions
- 50f8b5f bootutil: Add shared data support for XIP with revert
mode
- 8d0b35a bootutil: Add mode for XIP with revert
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In the HAL_ETH_ReadData function where it checks for the last
descriptor, I added a checked if the TSA bit was set in DESC1
If the TSA bit is set then have a peak at the context descriptor
which should be the one after the last descriptor
If the CTXT bit is set in the context descriptor then extract
the timestamps
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Update Zephyr fork of MCUboot to revision:
6c8c76fc37f10d7f3ce44474dc2a450f61ff46e0
Brings following Zephyr relevant fixes:
- 4da51013 zephyr: Add shared data support
- 9bef51ce bootutil/crypto: Do not include import key with PSA
- db2024eb espressif: update secure boot and flash encryption
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update loramac-node to release v4.7.0 from v4.6.0. The `v4.7.0-zephyr`
branch contains the same 4 additional commits as `v4.6.0-zephyr`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The bad DMA request was observed as SPU FLASHACCERR when building for
nrf5340dk_nrf5340_cpuapp_ns target. The bad DMA request would manifest
itself as device failing to reconnect after USB cable was reconnected.
The issue was especially visible with CDC ACM sample because SET LINE
CODING request has 7 bytes payload.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Update Zephyr fork of MCUboot to revision:
736234caa5ee0b3090cf02e5af0c2dc798aa4beb
Brings following Zephyr relevant fixes:
- c7aa2c0 boot_serial: Fix issues with single slot mode/encrypted
images
- 6ba46c0 boot_serial: Fix issue with queued commands
- 274547c bootutil: PSA Crypto ECDSA enablement
- 8f8fbf9 zephyr: Fall back to minimal C library
- 5c5222f boot_serial: Fix include
- b847a33 espressif: use minimal libc as default for ESP32 boards
- 480b97f boot_serial: Fix missing point if using snprintf
- 3790f5f boot: zephyr: use indication LED also in timeout based
recovery
- 0035c33 zephyr: Provide third image cases for direct image
upload
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This commit:
* adds the `CONFIG_SOC_GECKO_SERIES0` Kconfig option for Gecko Series 0
SoCs
* selects the proper `CONFIG_SOC_GECKO_SERIESx` option where it's currently
missing
Fixes#62806.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
New nrfx revision fixes issue in the PWM driver causing build
errors due to invalid include when workaround for anomaly 109
is enabled.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add a MBOX driver wrapper around the NXP MU, simular to
the existing wrapper around the NXP S32 MRU. This allows Zephyr IPC
to work based on the MU, on a number of NXP boards.
Also update the SHA of NXP HAL to enable the Kconfig for this driver.
Signed-off-by: Yicheng Li <yichengli@google.com>
The percepio module change removes unused kernel ports from the
zephyr version of the percepio module.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
This commit adds the DFM (DevAlert target side code) module and
moves the TraceRecorder module into the percepio module, which
results in the TraceRecorder module definition being removed
from the west manufest and module definition within zephyr.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
Make HCI driver compatible to the updated versions of the
EFR32 Bluetooth library BLOBs consisting of:
* libbluetooth_controller
* libbgcommon
* librail
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Updates the TI hal modules to include the following fixes in Zephyr's
ClockP API implementation:
* The unused stubs.h header was removed.
* The ClockP implementation contained some cruft due to an incomplete
migration from the ms based to the tick based kernel timer API.
* The ClockP implementation assumed timeouts and periods to be given in
ms although TI's API always expected ticks.
* A fix for a major conversion bug in TI's own usage of the ClockP API
throughout the SimpleLink framework is included.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
update west to fetch acpica PR 882 for running CI job. This is a temp
commit to verify CI job and will update with latest commit once acpica
PR get merged into mainline.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
In this board, there are eight PWM channels from
EMIOS 0 CH0 --> EMIOS 0 CH7 that can be used to
generate PWM pulse to outside of the board.
Moreover, there are three RGB leds that can use
PWM pins for blinking, faded leds
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Update TF-M version with fix for build with shared boot data enabled,
i.e. CONFIG_TFM_MCUBOOT_DATA_SHARING=y.
Regression from: 485fa940aa
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
* In Zephyr: The HW models now include N interrupt controllers
The interrupt handling code needs to target one controller
specifically.
* Update the HW models module to
57b61a9a2da75c860f15ca79522b24d57992df2c
Including the following:
* 57b61a9 INT CNTRL: Generalize to N controllers
* 1ea8194 nrf_bsim_redef.h: Add first definitions for nrf5340
* 5f81ee9 irq_ctrl: Lower a bit HW event priority
* 0986acc RNG: Add nrf53 variant in model
* 09345da RNG: Generate level interrupts instead of pulse ones
* f9b7c7a DPPI: Add first version
* 62dabd3 HW models: Initial peripheral adaptation for multi-int_cntr
* f54b59d HW models: Adding initial nrf5340 structure
* fb1edd9 HW models: Use HW types definitions only where neded
* 2744f4c Add basic support for variants
* a5f79cd nrf_bsim_redef.h: Remove unnecessary redefinitions
* 2c781dd HW_models: Improve includes
* bdb0a08 minor: Remove non-ASCII characters from source
* b5e95bd RADIO: Corrected note about MAXLEN and CRCINC behaviour
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update SNVS pin names in RT11xx DTSI files to align with new pin data
generated for the RT1176 and RT1166 processors. This pin data is stored
within the NXP HAL, so the SHA of the HAL is also updated by this
commit.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix i2c hang issue
- switch hpet/i2c/uart/gpio to use osxml generated header files for
IP registers
- spi dma support
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Update Zephyr fork of MCUboot to revision:
11ecbf639d826c084973beed709a63d51d9b684e
Brings following Zephyr relevant changes and fixes:
- 11ecbf63 zephyr: use cmsis_core.h header
- da65db00 zephyr: Provide slot definitions for three images
- 2c61caf6 bootutil: Move flash_area_id_to_image under ifdef
- 904d0c46 bootutil: Add DirectXIP version of boot_set_next
- 2a874b6e zephyr: Do not build in debug mode
- 258a6c7d bootutil: Fix support for more than 2 flash areas
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Xtensa HAL has been updated with the following changes:
* Removed intel_s1000 overlay files as it is no longer needed.
* Fix uninitialized variable warning in xthal_v2p()
* Add config and overlay files for dc233c core so we can use
QEMU with this core to test MMU code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert the nrf52_bsim board, to use the native simulator
as its engine.
This means some of the functionality the board included
before is now handled by the native simulator, including
the overall program main and CPU/HW scheduling.
Note that this board remains separate from the native_sim
board, even if both use the native simulator.
Also update the nRF HW models component to a new version
which has been converted into an extension for the
native simulator.
After this change, it becames also possible to build
the nrf52_bsim with an embedded C library, and to
use with it the Zephyr POSIX API shim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Handle MAXLEN and other related improvements
* PPI: Added 2 notes about status and shortcommings
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The existing heap starts at the beginning of SPIRAM which is also occupied
by the WiFi stack if CONFIG_ESP32_WIFI_NET_ALLOC_SPIRAM is enabled. This
results in memory corruption.
Update the linker description to add a _spiram_heap_start symbol and add a
KConfig size option to allow the SPIRAM stack to be correctly located and
sized. Requires matching commit in hal_espressif.
Fixes: 61359
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
This enables the power management for Intel ISH. It supports D0i1,
D0i2, D0i3 power saving modes for ISH.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
The change is to update the location of the NXP HAL license file (BSD-3)
to the root of the NXP HAL repo.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Fix bogus events/interrupts if shorts where used
* PPI: Handle well an event triggering a task twice
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
SiLabs' sleeptimer driver supports several hardware peripherals, of
which the counter driver so far only supports the RTCC-based variant.
This patch adds support for the SYSRTC-based sleeptimer implementation,
which is required for Gecko SoCs that do not have an RTCC module.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
The Zephyr-specific Segger SystemView configuration was not used as
the same file was available inside the external Segger module with
higher import priority.
Fixes the regression by moving the SystemView configuration to the same
place in the external module where RTT configuration already resides and
thereby creates a canonical include path to avoid further regressions of
the same kind.
Fixes: #61133
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This version introduces support for the syscalls extension,
which greatly reduces the amount of bandwidth being used
for tracing syscalls.
Signed-off-by: Aron Lander <aron.lander@percepio.se>
Add initial support for NXP S32 GMAC/EMAC:
- it's a copy-implementation with DMA data buffers and buffer
descriptors in non-cached memory (buf len and ring size configurable)
- PHY interface selection only implemented for S32K3 devices as it is
SoC-specific
- no PHY driver integration, it works as a fixed link with speed/duplex
configured through devicetree
- supports multicast hash filtering, promiscuous mode, MAC loopback
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Add missing HAL function override
* TIMER: Added notes about minor differences
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Bugfix if DISABLE or STOP during first us of TxStart
* File opening: Create folders if missing
* TIMER: Completed, including all count functionality
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update uoscore-uedhoc repository to the latest revision.
Align uoscore tests with the API changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds basic support for 'B' revision of the Silicon Labs EFR32BG
BRD4184 (Thunderboard BG22) board. Due to missing drivers, some of the
on-board peripherals are currently unsupported:
- Silicon Labs Si7021 relative humidity and temperature sensor
- Vishay VEML6035 ambient light sensor
- Knowles SPK0641HT4H-1 MEMS microphones
- TDK InvenSense ICM-20648 6-axis inertial sensor
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Reuse existing MCUX-based shim driver for FlexCAN.
Enable flexcan0 for Zephyr canbus to run tests.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
When `nrfx_pwm_stopped_check()` was called multiple times it was
returning incorrect value after second and next calls.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* RADIO: Improve T_IFS support, and fix for low latency mode
* docs: Miscelaneous improvements
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The NXP S32 QSPI controller acts as an interface to up to two serial
flash memory devices, each with up to eight bidirectional data lines,
depending on the platform. It is based on a LUT enginee to interface
through commands with different memory types including flash NOR and
Hyperram.
This patch adds support for the QSPI in S32K344 which supports a single
memory device (side A) with up to four bidirectional data lines and SDR
only. Nevertheless, the memory controller is implemented flexible enough
to be extended to support more feature-rich QSPI blocks.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Updates the west manifest to add an LVGL shell with initial memory
statistics and monkey testing support.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
Add Nuvoton numaker series flash memory controller(FMC) with erase,
read & write features of soc-flash. Also update Nuvoton manifest
to include zephyrproject-rtos/hal_nuvoton#6.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Update STM32Cube packages:
update stm32c0 to cube version V1.1.0
update stm32f2 to cube version V1.9.4
update stm32h5 to cube version V1.1.0
update stm32l1 to cube version V1.10.4
update stm32u5 to cube version V1.3.0
update stm32wb to cube version V1.17.0
update stm32wba to cube version V1.1.0
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Update Zephyr fork of MCUboot to revision:
6a8746d7acd75ff81fb6888d7776f412663f7897
Brings following Zephyr relevant fixes:
- 6a8746d boot_serial: fix image number handle in image upload
request
- f2cb550 boot_serial: fix misuse of 'matched' param from
zcbor_map_decode_bulk()
- 82feb9a boot_serial: Fix showing images that are not valid
- 61962b9 bootutil: fix FIH int conversion for security_cnt
- e6e4801 zephyr/boot_serial_extension: Fix zcbor header path
- a5db515 bootutil/crypto: SHA256 abort function return state
- 0361ad3 bootutil/crypto: SHA256 init functions should return a
status
- f92a219 bootutil/crypto: Fix minor typos in comments for RSA
modules
- 4854700 bootutil: Add image_index to additional logging messages
- 2f85b7e bootutil/crypto: Fix the common.h header
- c321a70 bootutil/crypto: Add a crypto backend for SHA256 based
on PSA Crypto APIs
- 02bf072 bootutil/crypto: Refactor the RSA signature verification
and encryption
- ba5fb1c bootutil: Add image_index to common prints
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* GPIO & GPIOTE: Add HW models, including PPI connections and HAL glue.
* NRF_NVMC: Avoid segfault on double call of cleanup
* BLECrypt_if: Avoid segfault on double call of cleanup
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The S32K3 MCUs are 32-bit Arm Cortex-M7-based microcontrollers with a
focus on automotive and industrial applications. The S32K344 features
a lock-step core, internal flash, RAM and TCM with ECC.
Co-authored-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Co-authored-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update the bsim top manifest repo and all its subrepos
to bsim release 2.2.1.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* PPI: add support for nrf_ppi_group_enable
* BLECrypt: Widen search for crypto library
* Makefile: Switch to gnu11 from c11 due to HAL
* NVMC: Minor fixes in command line options descriptions
Which enable more 15.4 functionality with the nrf driver
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This allows the MIPI Sys-T library to be built with minimal C
library. This is due to lack of support for wchar in our
minimal C library. This simply tells the library to skip any
wchar support.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to a limitation in the west import feature,
a project cannot both have an import and be part of a group.
Moreover, when a project has an import and is not filtered
out, it is required for that project to be present
for most west commands to work.
As the bsim project is not filtered by default,
it causes trouble for users who never run a
west update but try to use west further.
To work around this issue, let's disable the import
in the bsim project, and instead replicate its content
inside Zephyr's main manifest.
Having a replica of the babblesim manifest content
is likely to cause some confusion in users,
wrt to which version of components they are using.
So whenever west supports both imports and groups, or another
simple and nicer way of working around this, it should be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update LVGL revision with performance tuning options, including the
following:
- Enable forcing LVGL to perform a full display refresh on every update
- Enable custom alignment and linker section location of LVGL
framebuffers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enabled the Silicon Labs Bluetooth interface driver on the
EFR32BG27 SoC series in the Kconfig.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This udpates the manifest SHA to use the latest Xtensa HAL
commit which is to support building intel_adsp_ace15_mtpm
using Zephyr SDK.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds BLE support to the `efr32xg24_dk2601b` board. It also
modifies the SiLabs BT HCI driver to accomodate the EFR32xG24 SoC
series.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This fixes an issue related to SPIRAM and DRAM_1 region
access. It is possible that the application crashes due to
invalid pointer value.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update Zephyr fork of MCUboot to revision:
2878eb4e32fabc14bc391c3221cbf285064d9db4
Brings following Zephyr relevant fixes:
- ec2ac82c boot/zephyr: switch main return type to 'int'
- 67693442 boot: zephyr: esp32: zephyr port
- 0a1ef372 bootutil/crypto: Move BOOTUTIL_CRYPTO_ECDSA_P256_HASH_SIZE
into common
- 10529d30 bootutil/crypto: Have a single ECDSA verification module
- 966ac818 bootutil/crypto: Extend ECDSA to support P384 curve
- 25390ad5 bootutil/crypto: Have a single ECDSA abstraction file
- cf36d670 bootutil/crypto: Add license disclaimer to ecdsa_p256.h
- 557451d2 bootutil/crypto: Add a generic signature validation module
for ECDSA
- c725cee1 docs: Add release note snippet for ECDSA TLV
- 30978516 sim: Remove curve specific ECDSA TLVs
- 6205c10f sim: Add generic ECDSA TLV support
- 5704174c imgtool: Add generic ECDSA TLV support
- b08e77e0 bootutil: Create new generic ECDSA TLV
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Update to the latest NRF HW models which include
models of the NVMC and UICR peripherals,
as well as some other (very) minor fixes.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
KSGEN and CRYPT tasks and corresponding events weren't compiled
for boards with nRF51 SoCs due to change in HAL.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit adds the Gecko IADC driver and support for it to the
efr32bg_sltb010a board.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
This commit adds the SiLabs Bluetooth HCI driver. It also enables this
BLE HCI driver on the efr32bg_sltb010a board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
To facilitate users experience, fetch the required
BabbleSim components using the west manifest.
Until now, users would need to either use the Zephyr
docker image, or fetch bsim on their own.
For many years there has been a request to automate this
process. This is the first step.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
HAL API changes in ethernet and pwm
SoC RT595 power management code change
west.yml update
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
With -ffreestanding disabled, Zephyr SDK 0.15.0 generates a potentially
uninitialized variable warning that appears to be a false positive. Pull
in the upstream version of the module which contains the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Introduce PINT driver, for NXP pin interrupt and pattern match engine.
The driver currently supports only the pin interrupt feature of the
PINT.
Add DTS entires for the PINT on LPC and RT devices that support this
peripheral, and remove the interrupt defintions that are PINT specific
from the GPIO module on these devices.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Among other things, this update brings:
* C++ improvements
* float16 support
* Improved docs
* -Wall and -Wconversion compliance
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
In d540cf8877 I tried to optionally enable the cache management
functions in Open-AMP introducing a new CONFIG_OPENAMP_WITH_DCACHE
symbol.
This is not working. Introduce a proper fix to have this actually
working correctly as intended.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The nRF9161 is technically a SiP (System-in-Package) that consists of
the nRF9120 SoC and additional components like PMIC, FEM, and XTAL,
so for nrfx/MDK the nRF9120 SoC is to be selected as the build target,
but since the nRF9161 is what a user can actually see on a board, using
only nRF9120 in the Zephyr build infrastructure might be confusing.
That's why in the top level of SoC definitions (for user-configurable
options in Kconfig, for example) the nRF9161 term is used and nRF9120
underneath.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move the Segger RTT module Kconfig to modules/segger/kconfig. The Segger
debug library is not a driver and should not reside under drivers/debug.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
