| .. |
|
altr,jtag-uart.yaml
|
drivers: serial: uart_altera_jtag: enhancement
|
2023-01-27 14:24:43 -05:00 |
|
altr,uart.yaml
|
dts: bindings: serial: altera uart: remove redundent properties
|
2023-04-18 09:31:15 +02:00 |
|
ambiq,uart.yaml
|
dts: bindings: Add new binding ambiq,uart
|
2023-08-04 10:48:58 +02:00 |
|
arm,cmsdk-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
arm,pl011.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
arm,sbsa-uart.yaml
|
dts: bindings: arm,sbsa-uart: fix dangling entry
|
2023-03-16 15:42:36 +00:00 |
|
atmel,sam-uart.yaml
|
drivers: serial: sam: Update to use clock control
|
2023-03-21 14:12:25 -07:00 |
|
atmel,sam-usart.yaml
|
drivers: serial: sam: Update to use clock control
|
2023-03-21 14:12:25 -07:00 |
|
atmel,sam0-uart.yaml
|
dts: atmel sam: Document what rxpo and txpo mean.
|
2024-01-20 19:14:54 +01:00 |
|
brcm,bcm2711-aux-uart.yaml
|
boards: arm64: add support for Raspberry Pi 4 Model B
|
2023-09-28 13:40:45 +02:00 |
|
cdns,uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
cypress,psoc6-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
efinix,sapphire-uart0.yaml
|
dts: bindings: serial: Add efinix,sapphire-uart0
|
2023-06-27 12:09:57 +00:00 |
|
ene,kb1200-uart.yaml
|
dts: binding: serial: Add kb1200 uart
|
2024-03-15 09:39:48 +00:00 |
|
espressif,esp32-uart.yaml
|
drivers: uart: esp32: Add RS485 half duplex hardware mode
|
2023-03-22 13:52:25 +01:00 |
|
espressif,esp32-usb-serial.yaml
|
dts: bindings: clean up redundant required false attributes
|
2022-11-20 13:12:44 -05:00 |
|
gaisler,apbuart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
gd,gd32-usart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
infineon,cat1-uart.yaml
|
dts: bindings: Update to indicate SCB support
|
2023-05-24 16:41:06 +02:00 |
|
infineon,xmc4xxx-uart.yaml
|
dts: bindings: fix typo in (retained_mem, rng, serial, spi)
|
2024-01-30 18:50:08 -05:00 |
|
intel,lw_uart.yaml
|
drivers: serial: uart_intel_lw: add driver
|
2023-10-21 11:54:23 +02:00 |
|
intel,sedi-uart.yaml
|
drivers: serial: sedi: add new dts attri peripheral-id
|
2023-07-31 13:13:47 -04:00 |
|
ite,it8xxx2-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
litex,uart0.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
lowrisc,opentitan-uart.yaml
|
drivers: serial: Add support for OpenTitan serial UART
|
2023-01-27 19:25:26 +09:00 |
|
microchip,coreuart.yaml
|
treewide: rename Microsemi to Microchip
|
2023-05-04 10:47:07 +02:00 |
|
microchip,xec-uart.yaml
|
uart: microchip: add low power & wake support
|
2023-01-27 14:25:58 -05:00 |
|
neorv32-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
nordic,nrf-uart-common.yaml
|
drivers: serial: nrfx_uart/e: drop -pin support
|
2023-02-28 08:42:05 -08:00 |
|
nordic,nrf-uart.yaml
|
|
|
|
nordic,nrf-uarte.yaml
|
drivers: serial: uart_nrfx_uarte: utilize EasyDMA property from dts
|
2022-06-05 14:27:29 +02:00 |
|
ns16550.yaml
|
drivers: serial: Add optional reset line for uart_ns16550
|
2023-07-25 16:58:01 +00:00 |
|
nuvoton,npcx-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
nuvoton,numaker-uart.yaml
|
drivers: serial: support for Nuvoton numaker series UART
|
2023-06-21 09:26:00 +00:00 |
|
nuvoton,numicro-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
nxp,imx-iuart.yaml
|
dts: bindings: add a new 'rdc' property to the i.MX IUART bindings
|
2024-03-28 16:01:30 -05:00 |
|
nxp,imx-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
nxp,kinetis-lpsci.yaml
|
dts: bindings: serial: nxp,kinetis-lpsci: do not re-specify pinctrl-0
|
2023-09-29 08:44:19 -05:00 |
|
nxp,kinetis-lpuart.yaml
|
dts: nxp_lpuart: Interrupts is no longer a required property
|
2024-03-13 22:38:46 +00:00 |
|
nxp,kinetis-uart.yaml
|
dts: bindings: nxp,kinetis-*: do not re-specify pinctrl-0 type
|
2023-09-28 14:46:16 +02:00 |
|
nxp,lpc-usart.yaml
|
|
|
|
nxp,lpc11u6x-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
nxp,s32-linflexd.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
openisa,rv32m1-lpuart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
quicklogic,usbserialport-s3b.yaml
|
dts: bindings: rename quicklogic uart binding
|
2023-09-28 09:35:16 +02:00 |
|
raspberrypi,pico-uart-pio.yaml
|
drivers: serial: Added rpi_pico driver over PIO
|
2023-04-25 13:12:02 +02:00 |
|
raspberrypi,pico-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
renesas,ra-uart-sci.yaml
|
drivers: serial: Add UART driver for Renesas RA series
|
2023-11-01 10:56:46 +00:00 |
|
renesas,rcar-hscif.yaml
|
drivers: serial: add support of hscif driver for RCar boards
|
2024-02-26 11:34:16 +00:00 |
|
renesas,rcar-scif.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
renesas,rzt2m-uart.yaml
|
drivers: serial: add RZT2M uart driver
|
2023-11-15 11:41:35 +01:00 |
|
renesas,smartbond-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
segger,rtt-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
sifive,uart0.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
silabs,gecko-leuart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
silabs,gecko-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
silabs,gecko-usart.yaml
|
dts: bindings: drop remaining "required: false" from bindings
|
2023-01-04 14:23:53 +01:00 |
|
snps,hostlink-uart.yaml
|
drivers: serial: add virtual uart over ARC hostlink channel
|
2023-03-17 11:49:02 +01:00 |
|
snps,nsim-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
st,stm32-lpuart.yaml
|
dts: bindings: serial: Add common bindings for STM32 serial driver.
|
2022-08-23 07:11:08 -05:00 |
|
st,stm32-uart-base.yaml
|
dts: bindings: serial: stm32: block clock-frequency
|
2024-03-12 09:45:54 +00:00 |
|
st,stm32-uart.yaml
|
dts: bindings: serial: Add common bindings for STM32 serial driver.
|
2022-08-23 07:11:08 -05:00 |
|
st,stm32-usart.yaml
|
dts: bindings: serial: Add common bindings for STM32 serial driver.
|
2022-08-23 07:11:08 -05:00 |
|
telink,b91-uart.yaml
|
dts: bindings: add missing pinctrl-device.yaml includes
|
2023-09-27 13:58:28 +02:00 |
|
ti,cc13xx-cc26xx-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
ti,cc32xx-uart.yaml
|
boards: cc32(20|35)sf_launchxl: add UART0 pinctrl entries
|
2023-06-17 07:55:43 -04:00 |
|
ti,msp432p4xx-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
ti,stellaris-uart.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
uart-controller.yaml
|
drivers: serial: binding: add devicetree init support
|
2023-04-14 08:49:04 -05:00 |
|
uart-device.yaml
|
dts: bindings: device labels are now optional
|
2022-07-15 08:10:36 -05:00 |
|
xen,hvc-consoleio.yaml
|
drivers: serial: add missed binding for xen dom0 consoleio driver
|
2024-01-30 18:52:13 -05:00 |
|
xen,hvc-uart.yaml
|
dts: bindings: Add Xen Platform related dts bindings
|
2022-06-15 09:12:40 +02:00 |
|
xlnx,xps-uartlite-1.00.a.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
xlnx,xuartps.yaml
|
yamllint: indentation: fix dts/bindings/
|
2023-01-04 14:23:53 +01:00 |
|
zephyr,cdc-acm-uart.yaml
|
dts: bindings: drop remaining "required: false" from bindings
|
2023-01-04 14:23:53 +01:00 |
|
zephyr,native-posix-uart.yaml
|
|
|
|
zephyr,native-tty-uart.yaml
|
drivers: uart: add support for serial ports on native posix
|
2023-06-21 09:27:22 +02:00 |
|
zephyr,nus-uart.yaml
|
drivers: serial: bt: Add UART over NUS Bluetooth driver
|
2024-03-22 10:25:37 +01:00 |
|
zephyr,uart-emul.yaml
|
drivers: serial: emul: Make UART FIFO size realistic
|
2023-11-03 11:44:12 +01:00 |
0aaab73780