Simply to provide some consistencies on file naming under
arch/xtensa.
These are all internally used files and are not public.
So there is no need to provide a deprecation path for
them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
xtensa-asm2.h only contains the function declaration of
xtensa_init_stack() which is only used in one file. So
make the actual implementation a static function in that
file. Also there is really no need to expose stack init
function as arch public API. So remove xtensa-asm2.h.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
* Wording on CONFIG_SIMULATOR_XTENSA
* Remove "default n" as default is no anyway.
* Remove some tabs as we almost never indent inside a if block
in Zephyr.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no in-tree user. Also, it is misleading as we use
SCOMPARE1 for spinlock too, not just IPC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC should be defined at the SoC
or the board level since Xtensa cores are high configurable.
The default is just for ISS (Instruction Set Simulator). So
remove it from the arch level.
The xt-sim board is the only one in tree that is targeting
the ISS, so add it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We follow the path of the header to define the guard, aarch32 was
removed some time ago and the guards still had AARCH32 in them, just
remove it and keep the guard consistent and short.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instruction cache related functions (see include/zephyr/arch/cache.h)
are not implemented in x86, thus let's not set CONFIG_CPU_HAS_ICACHE
which may end up in build failure if one sets CONFIG_ICACHE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It did not build in x86_64 due to the fact that cr0 is a 64bits
register in such architecture, instead of being a 32bits one originaly
so the place holder has to follow that size. Such place holder must be
initialized to 0 to make sure no upper 32 bits ends up set which would
conclude in a general protection error.
Operand size specifier (l, q ...) is useless as well in this context.
Clearing up the masks by using proper macros.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the way we read the current l1 page table set in the mmu.
We use it check if the current page table is different from the
running thread.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
We use ptevaddr_get to know the address the page table is set.
It happens that for this use, we should just use the ptebase field
of ptevaddr register.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The ring field in the pte mapping a memory partition should
be based in the partition attribute and not in the domain
asid that is used only to set the ASID (in RASID) position for
user ring.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The arm_core_tz.c trustzone driver was developed by Nordic and was
previously used by Nordic, but it is not used by us any more. Since we
stopped using it I can see that it has bit rotted (the include path
for tz.h is not available), so no else has started using it either
evidently.
Remove the broken and dead code.
We keep the HAS_ARM_SAU Kconfig as it is selected by a myriad of
platforms and determines if __SAUREGION_PRESENT is defined. I have
been unable to prove that this define is also unused.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add `BUILD_ASSERT`s to make sure that the interrupt bits
allocated to each levels are enough to cover the number of
IRQs in each respective level.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Assert that the `local_irq` of each levels should only ranges
from `0` to `CONFIG_MAX_IRQ_PER_AGGREGATOR`, so that it doesn't
overflow the other aggregators.
Also, assert that the output of `z_get_sw_isr_table_idx` shouldn't
overflow the ISR table.
Update the `sw_isr_table` tests to test the range of
`CONFIG_MAX_IRQ_PER_AGGREGATOR` instead of the entire range of
level bits.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The `CAT_3RD_LVL_LIST` macro is only used when
`CONFIG_3RD_LEVEL_INTERRUPTS` is enabled, so move it into the
compiler guard.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The `irq` argument of the `Z_IF_DT_INTC_IRQN_EQ` macro
coincides with the `'irq'` argument passed into the `DT_IRQ`
macro, the former was supposed to be a number, while the latter
is a string/type, together this means that it was intepreted
as:
```c
DT_IRQ(node_id, <some_number>)
```
instead of
```c
DT_IRQ(node_id, irq)
```
as intended, so the macros never managed to match a device with
the IRQ properly, resulting in the `dev` member of the table
being NULL.
Solve this by renaming all the `irq` args in the macros to
`_irq` to avoid mixed usage.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The comment applies to all POSIX arch based targets,
not just native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add GDBSTUB_TRACE config option to extend GDB backend debug logging
for remote commands received and to debug the GDB stub itself.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Some libraries (like Openthread's spinel code) define their
API as externally linkable. This will make those symbols
remain as externally linkable by default after the
Zephyr build has produced the native simulator library
(MCU code).
When building an AMP native_simulator executable with
several MCUs each including these, the linker will see
those symbols as still linkable and duplicated, and
throw an error.
So let's give the option for users/developers of those
libraries to define extra symbols they want
to localize before assembling the final executable.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove old outdated include, causing build error. The acpi.h is not
needed since it is already included if ACPI is enabled and
INTEL_VTD_ICTL depends on ACPI.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Caches are optional on cortex-m7, having CPU_HAS_*CACHE in CPU_CORTEX_M7
definition renders them mandatory.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Use the returned reason from the secure fault handle function.
I see no reason why this was ignored, and it is used in the hardfault
handler.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for relocating local symbols, as specified in the
.rela.dyn section.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
io_mapped seems to always exist even though it's not set anywhere, so
testing if it is different to 0 to actually define
UART_IS_IOPORT_ACCESS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most x86 build configurations enable the UART console. Since EFI console
has also defaulted to enabled, this means that the EFI covers the early
part of the boot until UART takes over.
This is all fine, except that enabling EFI console has the effect of
disabling PRINTK_SYNC. This in turn has the effect of causing garbled
output over UART, which has led to several bug reports on x86 platforms
(in particular on up_squared).
Since EFI console should really only be used for early platform bringup
and debugging purposes, it's not really ideal to unconditionally have it
enabled by default. Instead, change the default enabling to be
conditional to the UART console being disabled.
Fixes#54861Fixes#55071
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
introduce global DSP_SHARING and CPU_HAS_DSP to be used by all
architectures and change existing usage in ARC to use those global
configs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/64268
MWDT supposes .device_states section as BSS because .device_states
variables defined as uninitialized. This causes the section marked
as NOLOAD section and OpenOCD does not take it in account while
flashing it into board memory.
Finally .device_states variables becomes initialized with garbage
from RAM.
In this PR it's suggested to clean .device_states in early init stage.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This moves including of demand_paging.h out of kernel/mm.h,
so that users of demand paging APIs must include the header
explicitly. Since the main user is kernel itself, we can be
more discipline about header inclusion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove limitation of enabling FP when building TF-M NS application.
FP support have been fixed in the tf-m-tests repository for NS
application.
Board support for NS executable may still be lacking for some boards.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Despite what the TF-M documentation says about SFN model not supporting
Floating Point, it does support it, according to TF-M developers.
Remove SFN limitation not supported with FP Hard ABI.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Annotate posix_exit() and nsi_exit() as noreturn
mainly to ease the life of static analysis tools.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Andy Ross re-implementation of MMU layer with some subtle changes,
like re-using existent macros, fix page table cache property when
direct mapping it in TLB.
From Andy's original commit message:
This is a reworked MMU layer, sitting cleanly below the page table
handling in the OS. Notable differences from the original work:
+ Significantly smaller code and simpler API (just three functions to
be called from the OS/userspace/ptable layer).
+ Big README-MMU document containing my learnings over the process, so
hopefully fewer people need to go through this in the future.
+ No TLB flushing needed. Clean separation of ASIDs, just requires
that the upper levels match the ASID to the L1 page table page
consistently.
+ Vector mapping is done with a 4k page and not a 4M page, leading to
much more flexibility with hardware memory layout. The original
scheme required that the 4M region containing vecbase be mapped
virtually to a location other than the hardware address, which makes
confusing linkage with call0 and difficult initialization
constraints where the exception vectors run at different addresses
before and after MMU setup (effectively forcing them to be PIC
code).
+ More provably correct initialization, all MMU changes happen in a
single asm block with no memory accesses which would generate a
refill.
Signed-off-by: Andy Ross <andyross@google.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This file doesn't need the asm2 header, and the preprocessor logic
around whether to include the backtrace header is needless (all it
does is declare functions).
Signed-off-by: Andy Ross <andyross@google.com>
Add a Kconfig option (and build warning) alerting about the problem
of the kernel spilling register in behave of the userspace.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use thread local storage to check whether or not a thread is running
in user mode. This allows to use threadptr to properly support tls.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Only clear the user stack to 0xAA if CONFIG_INIT_STACKS is
enabled. Otherwise, write 0x00 as if the stack is in BSS.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During arch_kernel_init(), the interrupt stack is being
initialized. However, if the current in-use stack is
the interrupt stack, it would wipe all the data up to
that point in stack, and might result in crash. So skip
initializing the interrupt stack if the current stack
pointer is within the boundary of interrupt stack.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We need to use the mmu spin lock when invalidating the cache during
tlb shootdown, otherwise it is possible that this happens when another
thread is updating the page tables.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the target has a cache way size (cache size / cache wasy) bigger
than the page size we have cache aliasing, since the number of bits
required by the cache index is bigger than the number of bits in the page
offset.
To avoid this problem we flush the whole cache on context switch or when
the current page table is changed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Swap page tables at exit of exception handler if we are going to
be restored to another thread context. Or else we would be using
the outgoing thread's page tables which is not going to work
correctly due to mapping and permissions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When adding a thread to a memory domain, we need to also update
the mapped page table if it is the current running thread on
the same CPU. If it's not on the same CPU, we need to notify
the other CPUs in case the thread is running in one of them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
After changing content of page table(s), it is needed to notify
the other CPUs that the page table(s) have been changed so they
can do the necessary steps to use the updated version. Note that
the actual way to send IPI is SoC specific as Xtensa does not
have a common way to do this at the moment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When kernel OOPS is raised, we need to actually go through
the process of terminating the offending thread, instead of
simply printing the stack and continue running. This change
employs similar mechanism to xtensa_arch_except() to use
illegal instruction to raise hardware exception, and going
through the fatal exception path.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Trigger exception on Xtensa requires kernel privileges. Add
a new syscall that is used when ARCH_EXCEPT is invoked from userspace.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This extracts the printing of fatal exception information into
its own function to declutter xtensa_excint1_c().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are known exceptions which are not fatal, and we need to
handle them properly by returning to the fixup addresses as
indicated. This adds the code necessary in the exception
handler for this situation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When MMU is enabled, we need some scratch registers to preload
page table entries. So update gen_zsr.py to that.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This changes the TLB misses handling back to the assembly
in user exception, and any page faults during TLB misses to be
handled in double exception handler. This should speed up
simple TLB miss handling as we don't have to go all the way to
the C handler.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Userspace support for Xtensa architecture using Xtensa MMU.
Some considerations:
- Syscalls are not inline functions like in other architectures because
some compiler issues when using multiple registers to pass parameters
to the syscall. So here we have a function call so we can use
registers as we need.
- TLS is not supported by xcc in xtensa and reading PS register is
a privileged instruction. So, we have to use threadptr to know if a
thread is an user mode thread.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplify the logic around xtensa_mmu_init.
- Do not have a different path to init part of kernel
- Call xtensa_mmu_init from C
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Replace all autorefill helpers with only one that invalidates both,
DTLB and ITLB, since that is what is really needed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This register alias was originally introduced to allow A0 to be used
as a scratch register when handling exceptions from MOVSP
instructions. (It replaced some upstream code from Cadence that
hard-coded EXCSAVE1). Now the MMU code is now using too, and for
exactly the same purpose.
Calling it "ALLOCA" is only confusing. Rename it to make it clear
what it's doing.
Signed-off-by: Andy Ross <andyross@google.com>
TF-M only suports floating point in IPC model, not the SFN model.
Since floating point is a basic feature of the architecture and TF-M
has the limitation it makes more sense for the dependency to exist in
TF-M and and limit the TF-M model choice instead of limiting the
option to enable floating point.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some workarounds were introduced for intel cavs2.5 platform bring up.
It is not general so move them to platform code.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Each arch platform may has a general arch_cpu_idle implementation but
each vendor may has a custom one, so this config will be used for vendor
to override it.
Some workarounds were introduced for intel cavs2.5 platform bring up.
It is not general so move them to platform code.
Signed-off-by: Rander Wang <rander.wang@intel.com>
When building without optimizations and with only one core the linker
does not throw away arch_start_cpu and we get an undefined reference to
x86_ap_start
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This moves the k_* memory management functions from sys/ into
kernel/ includes, as there are kernel public APIs. The z_*
functions are further separated into the kernel internal
header directory.
Also made a quick change to doxygen to group sys_mem_* into
the OS Memory Management group so they will appear in doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
z_mp_entry has been removed from Xtensa architecture.
So there is no need for a function declaration. Remove it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
NXP SYSMPU is used in other SoCs besides the Kinetis series. For
devices like S32K1xx, its bus interface clock lacks of clock gating
and it's driven by the system clock. Hence, only enable the module
clock for the Kinetis series.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This patch changes the section of riscv_cpu_wake_flag variable to
noinit from bss to fix hangup of RISC-V multicore boot if hart0 is
not boot hart (CONFIG_RV_BOOT_HART != 0).
Current boot sequence initializes a riscv_cpu_wake_flag to -1 but
this variable is unintentionally changed to 0 by boot hart.
This is because the variable is placed in bss section so this patch
changes the section of the variable to noinit.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch fixes hangup of RISC-V multicore boot.
Currently boot sequence uses a riscv_cpu_wake_flag to notify wakeup
request for secondary core(s).
But initial value of riscv_cpu_wake_flag is undefined, so current
mechanism is going to hangup if riscv_cpu_wake_flag and mhartid of
secondary core have the same value.
This is an example situation of this problem:
- hart1: check riscv_cpu_wake_flag (value is 1) and end the loop
- hart1: set riscv_cpu_wake_flag to 0
- hart0: set riscv_cpu_wake_flag to 1
hart0 expects it will be changed to 0 by hart1 but it
has never happened
Note:
- hart0's mhartid is 0, hart1's mhartid is 1
- hart0 is main, hart1 is secondary in this example
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
The FMADD, FMSUB, FNMSUB and FNMADD instructions occupy major opcode
spaces of their own, separate from LOAD-FP/STORE-FP and OP-FP spaces.
Insert code to cover them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
elf_rela_t contains elf_rel_t exactly and contains an additional
field at the end. Therefore pointers of that type can be used for
both types, making the code generic.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Most of the public APIs in `riscv_plic.h`
(except `riscv_plic_get_irq` & `riscv_plic_get_dev`) expect the
`irq` argument to be in Zephyr-encoded format, instead of the
previously `irq_from_level_2`-stripped version. The first level
IRQ is needed by `intc_plic` to differentiate between the
parent interrupt controllers, so that correct ISR offset can be
obtained using the LUT in `sw_isr_common`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Instead of using a macro guard to prevent functions in
`sw_isr_common.c` from getting compiled when
`CONFIG_DYNAMIC_INTERRUPTS` isn't enabled, do that in
`CMakeLists.txt` instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Refactor multi-level IRQ related code from `sw_isr_common.c` to
`multilevel_irq.c` to simplify `sw_isr_common` & macrologies.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Relocate new and existing internal software-managed table
access functions from the public `sw_isr_table.h` into a
private header that should only be accessed internally.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Change the internal function to `get_parent_entry`, which
returns the entire entry of table.
Store the parent interrupt controller device in the
`irq_parent_offset` table, and added 2 helper functions to:
1. determine the parent interrupt controller based on the IRQ
2. determine the IRQ of the parent interrupt controller
Declare the `struct _irq_parent_entry` in the header and added
`-` suffix to the struct so that it can be used to test the
functions in testsuites.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This change adds support for the CONFIG_ARM_CUSTOM_INTERRUPT_CONTROLLER
option on Cortex-M platforms. While all Cortex-M platforms have a
NVIC controller some custom SoCs may have additional IRQ controllers
or custom handling. This change allows those SoCs to modify this
bahaviour without having to place platform specific logic inside
applications or drivers.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
The Cortex ARM documentation states that the DC IVAC instruction
requires write access permission to the virtual address (VA);
otherwise, it may generate a permission fault.
Therefore, it is needed to avoid invalidating read-only memory
after the memory map operation.
This issue has been produced by commit c9b534c.
This commit resolves the issue #64758.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Some platforms already have .bss section zeroed-out externally before the
Zephyr initialization and there is no sence to zero it out the second time
from the SW.
Such boot-time optimization could be critical e.g. for RTL Simulation.
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
This commit introduces SMP support into Cortex-A/R aarch32 architecture.
For now, this only supports multiple core start together and only allow
one CPU initialize system as primary core, others loop at the beginning
as the secondary cores and wait for wake up.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit introduce 'USE_SWITCH' feature into cortex-A/R(aarch32)
architecture
For introducing USE_SWITCH, the exception entry and exit are unified via
`z_arm_cortex_ar_enter_exc` and `z_arm_cortex_ar_exit_exc`. All
exceptions including ISR are using this way to enter and exit exception
handler.
Differentiate exception depth and interrupt depth. Allow doing
context switch when exception depth greater than 1 but not allow doing
this when interrupt depth greater than 1.
Currently, USE_SWITCH doesn't support FPU_SHARING and USERSPACE.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Store the current CPU's struct _cpu instance into TPIDRURO, so that the
CPU core can get its struct _cpu instance by reading TPIDRURO. This is
useful in the SMP system.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Replace the TLS base address pointer from TPIDRURO to TPIDRURW.
The difference between them is that TPIDRURO is read-only in user mode
but TPIDRURW isn't. So TPIDRURO is much more suitable for store
the address of _kernel.CPU[n]. For this reason, this commit replaces
the base pointer of the TLS area.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
MMU or MPU unit need to be initialized by its own CPU.
- Primary core initialize MMU or MPU unit in z_arm_prep_c.
- Secondary core initialize MMU or MPU unit in z_arm_secondary_start.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Use ACPI_MADT_LOCAL_APIC instead of struct acpi_madt_local_apic. In the
same go, switch to IF_ENABLED from ifdef - slightly more readable, and
this keeps some static analyzers happy (e.g. upstream Compliance check).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HCR_EL2 is configured to certain value by some
loaders such as Uboot on some arm64 boards(such as roc_rk3568_pc),
When HCR_EL2.TGE, HCR_EL2.AMO and HCR_EL2.IMO bits are
set to 1, some unpredictable behaviors may occur during
zephyr boot. So we clear these bits to avoid it.
Signed-off-by: Charlie Xiong <1981639884@qq.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
