Refactor the pinctrl nodes slightly so that the port devices are not
child of the main pinctrl node. This is because the pinctrl node is
being used as parent for pinctrl setting nodes itself, and having the
port nodes as child end up creating a circular depdency with the edt
child enumeration patch.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Increase the `ndev` of PLIC to the max of 1024 from 53, as
supported by the RISCV PLIC. The total number of IRQs is now
1035(1024 + 11), up from 64(53 + 11).
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Define all the register offset directly in the driver according
to the RISCV PLIC specification as they are not configurable,
see: https://github.com/riscv/riscv-plic-spec.
Updated devicetrees that has PLIC accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update the descriptions for the various CAN devicetree timing properties
specified in Time Quanta (TQ) to make it clear that these, if present, are
only used for the initial timing parameters.
Deprecate the (Re-)Synchronization Jump Width (SJW) devicetree properties
for both arbitration and data phase timing as these are now only used in
combination with the other TQ-based CAN timing properties, which are all
deprecated.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When the alternate setting is configured as func3, in addition to
the setting of func3-gcr, some pins require external setting.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit adds/modifies `riscv,isa` strings using the following rules:
* the ISA string is lowercase
* multi-letter extensions are preceded with the underscore mark
* if an extension is implied by another one, it is not specified - e.g. the
D extension implies the F extension, so writing `rv32ifd` is redundant
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Sometimes, channel C may write wrong register to the target device.
This issue occurs when FIFO2 is enabled on channel C. The problem
arises because FIFO2 is shared between channel B and channel C.
FIFO2 will be disabled when data access is completed, at which point
FIFO2 is set to the default configuration for channel B.
The byte counter of FIFO2 may be affected by channel B. There is a
chance that channel C may encounter wrong register being written due
to the FIFO2 byte counter wrong write after channel B's write operation.
The current workaround is that channel C cannot use FIFO mode.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Introduce dtsi files representing the
current portfolio of chips and modules
based on the:
- flash size
- psram size
- gpio count
- certification status
Update the boards dts files according
to which SOC/SIP they are using.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
CPU idle states are not board specific. This patch moves ESP32 idle
states to the core SoC dts files. Board can always tweak some state
parameters (if needed), but the definition belongs to core SoC dts
files, same as e.g. peripherals.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add SHA256 accelerator support for it8xxx2 series.
This driver passes the following test:
tests/crypto/crypto_hash/
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Adds the pwrmgr devicetree node. This is a simple binding that holds
only the address of the registers for now.
This patch is part of the OpenTitan watchdog (AON Timer) support patch
series. It is needed to ensure that the watchdog reset functionality
is enabled.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
This commit moves the `mpfs-icicle.dtsi` file to a common `microchip`
directory and updates include paths in the `mpfs_icicle` board
devicetree.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The current configuration is too long and will block soc from
entering sleep mode. This change was made to get better power
number on EVB.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
1. Increase sram to 256KB.
A block sram of SCAR0~15 is 4KB.
A block sram of SCAR16~19 is 16KB.
A block sram of SCAR20~23 is 32KB.
2. Removed the register of RVILMCR which has no effect.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The alternate pins of UART2 have been remapped, and the remapped
alternate pins must be added to the pinctrl map.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add the pinctrl node that has been remapped in the chip of it82xx2.
And modify kscan's pinctrl for the it82xx2.
And swap I2C default pins.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Microchips PolarFire-SoC Icicle Kit has 4x UART interfaces available
via single micro USB and 1x UART for programming and debugging via micro
USB. Add the remaining UARTs to the Devicetree
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Some lines of the mpfs_icicle Devicetree contained a jumble of white
space and tabs. Just use tabs
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Change the preprocessor identifier from CONFIG_SOC_ESP32C3 to
SOC_GDMA_SUPPORTED so it can include ESP32S3 in GDMA routines.
Remove hardcoded values from hal calls to use dma_host instead.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
- Add overlay for the esp32c3 board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32c3 dtsi.
Testing Environment:
esp32c3-devkitC-02
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
Microchip's PolarFire SoC has a core complex consisting of one e51
monitor core and four u54 application cores. Add the remaining cpu nodes
to mpfs-icicle device tree. Add the software and timer interrupt irq's
to the clint for the additional cpu nodes.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
