Sort the Kconfig and CMakeLists include blocks again, and mark the start
and end of the blocks so that the CI can keep them sorted.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
- Make caparray delta a Kconfig variable
- Set caparray delta for beagle_bcf at beagleconnect_freedom_defconfig
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
- Add support cc1352p7 used by beagleconnect_freedom
- Since this is a multi interface device, auto config does not work.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Some platforms prefix extra logging information before the standard
[] blocks so I've added `.\*` to the regex. Also, removed the static
values so they're only referenced using 'self.' and stopped parsing
lines after the FINISHED_PATTERN is matched since some versions of
gTest also print out a test summary after and it's not useful for
the processing.
Signed-off-by: Yuval Peress <peress@google.com>
DW watchdog driver is not used on ACE,
Intel ADSP watchdog driver will be used in DTS when ready to use
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Having a % FIFO watermark isn't very useful as it doesn't convey how long
the SoC can sleep (or do other work) while batching sensor data. Convert
the attribute to a batch duration using ticks. Currently the ticks are
in system ticks, but eventually when an external clock is attached to
the sensor it will be in the external clock's ticks.
Signed-off-by: Yuval Peress <peress@google.com>
Add streaming implementation for icm42688 using both threshold and
full FIFO triggers.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Convert the ITE keyboard scanning driver from kscan to input, add the
corresponding kscan compatibility node to the current board, build test
only.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use GPIO_OUTPUT_INACTIVE to initialize the pin so that the ACTIVE_LOW DT
flag is honored and use the gpio_pin_set_dt functions to set the
(logical) value of the pin instead of gpio_pin_configure_dt, that
tries to reconfigure the pin each time.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Responding to feedback from the community, clarify that the cmd.exe
window needs to be closed and reopened.
Also be specific about the type of terminal window to be used.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Multiple users have failed to read the output from the Homebrew
installation script, which instructs the user how to add it to the
path. Include the instructions in the guide.
Also add a step to include the Homebrew Python executable to the path,
which allows then for invocation of python and pip as well as python3
and pip3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Initialize the MDIO peripheral clock (normally done during GMAC
initialization) before trying any MDIO transfers, preventing startup
errors.
Signed-off-by: Nick Kraus <nick@nckraus.com>
Due to the west build path in official sample doc is now change
to root directory, we modify our west build command align the
official sample doc.
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
On the STM32H735G-DK Discovery kit, when connecting a UART from
pin PF7 to PF6, the test uart_async_api passes now.
Signed-off-by: Benjamin Deuter <benjamin.deuter@gmail.com>
Make documentation more readable by separating API with help of @name
instead of simple comment in the code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add binding for nxp,mrt and nxp,mrt-channel. MRT is
NXP multirate timer, a simple timer with multiple
independent channels.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
In the PTS BASS/SR/CP/BV-19-C test case a client executes Set
Broadcast Code operation of Broadcast Audio Scan Control Point
characteristic with Broadcast_Code set to an invalid value.
After syncing to an ISO stream there is an expected failed attempt
to decrypt the stream data, but the host does not set BIG_Encryption
value to the expected value 0x03 (BT_BAP_BIG_ENC_STATE_BAD_CODE).
Add missing BIG_Encryption state into the failing check.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Try to use llext_peek() for section pointers. If it's supported and
succeeds we don't need to allocate buffers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The only way so far to access extension images is via a memory
buffer. Since this, supposedly, will also be a rather common method,
it makes sense to add a method to access extension data quickly by
obtaining a pointer instead of copying data into local buffers. Add a
llext_peek() method for that.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
We need to do a build assert for the fifo enable status of 'I2C2'.
There is a problem with using instance to obtain property when
any one I2C port is not enabled.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
To better cover the struct fields of the DMA API in doxygen the fields
are now individually documented rather than documenting them ad-hoc in
the struct header doc comment.
A best attempt at marking fields that are HW specific has been done as
well. That means almost all of them.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The DMA API has several expectations for drivers and callers that were
underdocumented or undocumented. Better clarify the driver expectations
and caller expectations.
The DMA API from the caller side is not a portable API and really cannot
be as each DMA has unique properties and expectations of memory,
peripheral interaction, and features. The API in effect provides a union
of all useful DMA functionality drivers have needed in the tree. It can
still be a good abstraction, with care, for peripheral devices for
vendors where the DMA IP might be very similar but have slight
variances.
From the driver implementation side expectations around synchronization,
state transitions, and memory management for transfer descriptors is now
described in documentation rather than solely from me in github review
comments.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This patch fixes hangup of RISC-V multicore boot.
Currently boot sequence uses a riscv_cpu_wake_flag to notify wakeup
request for secondary core(s).
But initial value of riscv_cpu_wake_flag is undefined, so current
mechanism is going to hangup if riscv_cpu_wake_flag and mhartid of
secondary core have the same value.
This is an example situation of this problem:
- hart1: check riscv_cpu_wake_flag (value is 1) and end the loop
- hart1: set riscv_cpu_wake_flag to 0
- hart0: set riscv_cpu_wake_flag to 1
hart0 expects it will be changed to 0 by hart1 but it
has never happened
Note:
- hart0's mhartid is 0, hart1's mhartid is 1
- hart0 is main, hart1 is secondary in this example
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Read real frequncy from ARM Arch Timer instead of using define
'CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC' which can be incorrect for
some run cases. If we run xenvm under qemu we get one frequency, but
we can run this build as a DomU for Xen under different real platforms
and thus with differenty arch timer frequencies. So, we need to read
frequency from the timer registers.
Signed-off-by: Mykola Kvach <xakep.amatop@gmail.com>
There shouldn't be any reason to be able to modify the passed psk,
and having this non-const gives application warnings if passing a
constant string.
Signed-off-by: Maciej Zagrabski <mzi@trackunit.com>
The FMADD, FMSUB, FNMSUB and FNMADD instructions occupy major opcode
spaces of their own, separate from LOAD-FP/STORE-FP and OP-FP spaces.
Insert code to cover them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Correct Properties subsection of the document to be accurate
to the latest implementation of the charger API.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Removes a statement at the introduction claiming only getting
properties is supported by the API. The charger API can get/set
properties.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Seems like the PDF build hit the "detected dubious ownership in
repository" issue that has already been worked around in other workflow.
Add that step here as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Skip the rebase step if it's not a pull request. Schedule and push runs
have no base ref to rebase against anyway, currently the step is failing
and being skipped.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
elf_rela_t contains elf_rel_t exactly and contains an additional
field at the end. Therefore pointers of that type can be used for
both types, making the code generic.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
