This patch reorders the power domain node definitions in the ACE 1.5
Meteorlake DTS file to improve readability and facilitate comparison with
the documentation.
Changes include:
- Reordering power domain nodes by their bit positions.
- No changes to the bit positions themselves; they remain as originally
defined.
This reordering does not affect the functionality but makes the DTS file
more maintainable and easier to cross-reference with the hardware
specification.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
DW watchdog driver is not used on ACE,
Intel ADSP watchdog driver will be used in DTS when ready to use
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Fix the following compilation warning:
```
Warning (unit_address_format): /memory@0xb0000000: \
unit name should not have leading "0x"
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
LP/HP RING OSC clocks were replaced by the ACE IPLL clock.
If needed IPLL can be configured to work as low power clock. But right
now ACE uses only WOVCRO and IPLL (configured to work as HP RING OSC
clock).
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
LP/HP RING OSC clocks were replaced by the ACE IPLL clock.
If needed IPLL can be configured to work as low power clock. But right
now ACE uses only WOVCRO and IPLL (configured to work as HP RING OSC
clock).
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
The ACE family platforms do not have LP/HP RING OSC clocks. They were
replaced by the ACE IP integrated PLL clock. Selecting LP or HP in
CLKCTL will result in enabling IPLL.
Clock can supply frequencies for both replaced clocks, default frequency
equals to 393.2 MHz.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
The ACE family platforms do not have LP/HP RING OSC clocks. They were
replaced by the ACE IP integrated PLL clock. Selecting LP or HP in
CLKCTL will result in enabling IPLL.
Clock can supply frequencies for both replaced clocks, default frequency
equals to 393.2 MHz.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Add missing definitions for ALH DAIs. Keep the same FIXME
reminder in the comments we have for ACE1.5 that explains
the background of these definitions.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To properly setup L1 exit timing this patch will use buffer interrupt
for HOST DMA and wait for Host HDA to actually start
First interrupt will clear all others.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
On ACE a seperate, soc specific, interrupt mask needs to be enabled
to unmask the interrupt. Do so for GPDMA.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add simple mechanism to load the image from IMR memory. Basically we are
only setting a flag in power off for the next boot to jump to existing
image in IMR.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
The ACE 2.0 LNL platform has 5 HIFI4 cores. Change number
of cores to enable 5th core on the platform.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Added i-cache-line-size and d-cache-line-size values
to device tree for ace20_lnl platforms. These values
are used by sys_cache_instr_line_size_get and
sys_cache_data_line_size_get functions.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
CAVS platforms are not fully integrated with zephyr. Some of the
registers are still programed from SOF side. This feature can be enabled
for those platforms later when integration is fully done.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch adds HDA to device tree for LNL platforms.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The I2CLCTL_MLCS setting was recently added to MTL
platform. LNL has these registers in separate space, therefore
new field is added to intel,ssp-dai.yaml and appropraite definitions
to LNL device tree.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Repleace usage of shim2 device tree field with hdamlssp.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In ACE 2.0 platform (LNL) dmic got two new shim register ranges.
DMIC driver need to program them to configure the interface.
This patch adds new shims to device tree.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Sort SoC nodes by address to make it easier to find them. As part
of this also move the intel-sha node under SoC where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
In ACE 2.0 platform (LNL) ssp got new shim registers.
SSP driver need to program them to configure the interface.
This patch adds new shims to device tree.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
As the power domain nodes don't represent something accessible via
a MMIO register move those under the lps node to address warnings
generated when building the DTS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
LNL platform is ACE 2.0 series with changes in shim registers and HW
features. Initial definition replicates MTL as much as possible, however
it will vary after enabling LNL platform.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds definition of ACE 2.0 Lunar Lake board.board.
Signed-off-by: Krzysztof Frydryk <Krzysztofx.Frydryk@intel.com>
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed the watchdog driver used by the ACE platform from
snps,designware-watchdog to intel,adsp-watchdog.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Start using zephyr power management in cavs platform in a similar way
that is already done in ace. This commit only addresses the power off/on
sequence. Runtime power management is not implemented.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Fixes the warning below. This commit does not change the firmware
binary. Thanks Kumar Gala for the suggestion.
build-mtl/zephyr/zephyr.dts:279.42-285.5: Warning (simple_bus_reg):
/soc/ace_comm_widget@71C00: simple-bus unit address format error,
expected "71c00"
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Intel DSP Communication Widget is a device for generic sideband
message transmit/receive between IPs in a SOC.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
ALH dts definitions need to have 16 nodes, thus add them to supported
platforms (cavs25 and ace15).
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Add virtual memory entry in dt to use as virtual space
regions for aplication.
Add virtual memory definition in adsp_memory.h
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
Adds two additional alh2 and alh3 "devices" to already defined
alh0 and alh1. This (seems) is a temporarily solution as
the hardware actually supports 16 streams and future update
to device tree is required.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Assigning power domain to the GP DMA.
NOTE: Only controllers 1 and 2 are under IO_0 domain, controller 0 is
under HUB-ULP domain.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Add definitions for DMAs, Digital Audio Interfaces (DAIs) and
the necessary clocks to enable full use of audio peripherals
in the intel_adsp_cavs25_tgph boards.
Link: https://github.com/thesofproject/sof/issues/6710
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
add Intel HDA DAI driver
Long device list in dtsi needs to be refactored in the future
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Added i-cache-line-size and d-cache-line-size values
to device tree for cavs and ace platforms. These values
are used by sys_cache_instr_line_size_get and
sys_cache_data_line_size_get functions.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
