| .. |
|
CMakeLists.txt
|
drivers: gpio: add brcmstb gpio driver
|
2024-04-25 18:06:43 -04:00 |
|
gpio_ad559x.c
|
drivers: ad559x: add i2c bus support
|
2024-04-01 12:18:47 -05:00 |
|
gpio_ads114s0x.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_altera_pio.c
|
drivers: gpio: altera_pio add spinlock
|
2023-09-25 16:41:17 +02:00 |
|
gpio_ambiq.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_andes_atcgpio100.c
|
drivers: gpio: atcgpio100: remove redundant include
|
2024-01-19 15:13:53 +00:00 |
|
gpio_axp192.c
|
drivers: gpio: axp192: Add support to control EXTEN pin
|
2024-03-06 10:23:31 +00:00 |
|
gpio_b91.c
|
drivers: gpio: b91: add missing PLIC header
|
2024-01-15 09:58:03 +01:00 |
|
gpio_bcm2711.c
|
drivers: gpio: Add GPIO driver for BCM2711
|
2023-10-24 11:03:44 +02:00 |
|
gpio_bd8lb600fs.c
|
drivers: gpio: split up driver for BD8LB600FS into a GPIO and MFD
|
2024-03-15 09:00:26 +01:00 |
|
gpio_brcmstb.c
|
drivers: gpio: add brcmstb gpio driver
|
2024-04-25 18:06:43 -04:00 |
|
gpio_cc13xx_cc26xx.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_cc32xx.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_cmsdk_ahb.c
|
treewide: Update clock control API usage
|
2023-04-05 10:55:46 +02:00 |
|
gpio_creg_gpio.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_cy8c95xx.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_davinci.c
|
drivers: gpio: davinci: Add pinctrl
|
2023-11-13 09:42:11 +01:00 |
|
gpio_dw.c
|
drivers: gpio: dw: Address warning of unused gpio_dw_isr
|
2024-03-24 12:49:23 +01:00 |
|
gpio_dw.h
|
drivers: gpio: dw: Remove dead clock gate code
|
2022-07-14 10:31:42 +02:00 |
|
gpio_dw_registers.h
|
drivers: gpio_dw: update to use new GPIO API
|
2020-02-05 12:00:36 +01:00 |
|
gpio_efinix_sapphire.c
|
drivers: gpio: correct spelling
|
2024-01-13 00:24:04 +00:00 |
|
gpio_emul.c
|
drivers: gpio: Implement pin interrupt enable and disable
|
2023-04-06 11:44:07 -04:00 |
|
gpio_emul_sdl.c
|
drivers gpio SDL emul: Split in top and bottom
|
2023-07-06 16:04:15 +02:00 |
|
gpio_emul_sdl_bottom.c
|
drivers gpio SDL emul: Split in top and bottom
|
2023-07-06 16:04:15 +02:00 |
|
gpio_emul_sdl_bottom.h
|
drivers gpio SDL emul: Split in top and bottom
|
2023-07-06 16:04:15 +02:00 |
|
gpio_ene_kb1200.c
|
drivers: gpio: initial device driver for ENE KB1200
|
2024-03-15 09:39:48 +00:00 |
|
gpio_eos_s3.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_esp32.c
|
soc: xtensa,riscv: esp32xx: refactor folder structure
|
2023-07-25 18:12:33 +02:00 |
|
gpio_fxl6408.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_gd32.c
|
treewide: Update clock control API usage
|
2023-04-05 10:55:46 +02:00 |
|
gpio_gecko.c
|
boards: arm: efr32bg27_brd2602: Initial support
|
2023-04-21 12:55:06 +02:00 |
|
gpio_handlers.c
|
syscall: rename Z_OOPS -> K_OOPS
|
2023-11-03 11:46:52 +01:00 |
|
gpio_hogs.c
|
init: remove the need for a dummy device pointer in SYS_INIT functions
|
2023-04-12 14:28:07 +00:00 |
|
gpio_ifx_cat1.c
|
drivers: cat1: Updates to support latest version of HAL/PDL
|
2023-09-01 09:52:25 +02:00 |
|
gpio_imx.c
|
drivers: gpio: fix coverity memory overwrite error
|
2023-07-21 10:55:21 +00:00 |
|
gpio_intel.c
|
drivers: gpio: gpio_intel: add acpi base resource enumeration
|
2024-04-22 06:50:38 -07:00 |
|
gpio_ite_it8xxx2.c
|
ITE: drivers/gpio: Correct the wake up control input
|
2023-12-01 12:41:22 +01:00 |
|
gpio_ite_it8xxx2_v2.c
|
ITE: drivers/gpio: Fix untrusted loop bound
|
2024-02-19 19:59:27 +01:00 |
|
gpio_kscan_ite_it8xxx2.c
|
ITE: drivers/gpio: Add critical section to avoid race condition
|
2023-08-25 13:14:47 +02:00 |
|
gpio_litex.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_lmp90xxx.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_lpc11u6x.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_mchp_mss.c
|
drivers: gpio: mchp_mss: remove redundant include
|
2024-01-19 15:13:53 +00:00 |
|
gpio_mchp_xec.c
|
drivers/gpio: Make MCHP XEC pin configure closer to XEC V2
|
2023-10-26 09:47:30 +02:00 |
|
gpio_mchp_xec_v2.c
|
drivers: gpio: mec172x: Add message to warn about pins not in GPIO mode
|
2024-04-05 23:47:32 +03:00 |
|
gpio_mcp23s17.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_mcp23sxx.c
|
drivers: gpio: mcp23xxx: add support for reset pin
|
2023-03-20 10:43:12 +01:00 |
|
gpio_mcp23xxx.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_mcp23xxx.h
|
drivers: gpio: mcp23xxx: add support for reset pin
|
2023-03-20 10:43:12 +01:00 |
|
gpio_mcp230xx.c
|
drivers: gpio: mcp23xxx: add support for reset pin
|
2023-03-20 10:43:12 +01:00 |
|
gpio_mcux.c
|
drivers: gpio_mcux: Add support for GPIO ICR
|
2024-03-13 22:38:46 +00:00 |
|
gpio_mcux_igpio.c
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
gpio_mcux_lpc.c
|
drivers: gpio: mcux_lpc: Support MCI_IO_MUX
|
2024-03-13 16:45:13 +00:00 |
|
gpio_mcux_rgpio.c
|
driver: add new gpio driver "gpio_mcux_rgpio"
|
2024-01-16 20:50:11 -05:00 |
|
gpio_mmio32.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_nct38xx.c
|
gpio: nct38xx: Remove reg access wrappers
|
2023-09-11 11:00:47 +02:00 |
|
gpio_nct38xx.h
|
mfd: Add NCT38xx multi-function driver
|
2023-09-11 11:00:47 +02:00 |
|
gpio_nct38xx_alert.c
|
gpio: nct38xx: Remove reg access wrappers
|
2023-09-11 11:00:47 +02:00 |
|
gpio_nct38xx_port.c
|
gpio: nct38xx: Remove reg access wrappers
|
2023-09-11 11:00:47 +02:00 |
|
gpio_neorv32.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_npcx.c
|
intc: miwu: npcx: improve interrupt latency of miwu input events
|
2023-05-17 09:48:54 +02:00 |
|
gpio_npm1300.c
|
drivers: gpio: npm1300: Event configuration based on active state
|
2024-03-21 10:25:42 +00:00 |
|
gpio_npm6001.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_nrfx.c
|
modules: hal_nordic: nrfx: update API version to 3.2.0
|
2024-01-08 11:19:37 +01:00 |
|
gpio_numaker.c
|
drivers: gpio: support for Nuvoton numaker series GPIO
|
2023-06-21 09:26:00 +00:00 |
|
gpio_numicro.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_nxp_s32.c
|
gpio: nxp_s32: support passing external interrupts to WKPU
|
2023-10-11 16:38:34 +01:00 |
|
gpio_pca95xx.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_pca953x.c
|
drivers: gpio: pca953x: check return values from I2C API functions
|
2024-01-03 10:21:28 +01:00 |
|
gpio_pcal64xxa.c
|
gpio: pcal64xxa: switch to 8 bit internal data automatically
|
2024-03-12 16:06:25 +01:00 |
|
gpio_pcf857x.c
|
drivers: gpio: PCF857x: Modify PCF8574 driver
|
2024-01-16 15:19:14 +00:00 |
|
gpio_psoc6.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_rcar.c
|
drivers: gpio: rcar: Add R-Car Gen4 support
|
2023-11-25 08:50:47 -05:00 |
|
gpio_renesas_ra.c
|
drivers: gpio: Rename renesas ra driver
|
2024-01-29 11:32:46 +01:00 |
|
gpio_rpi_pico.c
|
drivers: gpio_rpi_pico.c: add support for single-ended IO
|
2023-02-26 18:38:08 -05:00 |
|
gpio_rt1718s.c
|
drivers: gpio: use gpio_is_ready_dt helper function
|
2023-08-28 08:48:35 -05:00 |
|
gpio_rt1718s.h
|
driver: gpio: rt1718s: Add RT1718S GPIO driver
|
2022-11-28 10:48:53 +01:00 |
|
gpio_rt1718s_port.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_rv32m1.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_rzt2m.c
|
drivers: gpio: add interrupt support to renesas rzt2m gpio
|
2024-03-29 10:56:55 +01:00 |
|
gpio_sam.c
|
treewide: Update clock control API usage
|
2023-04-05 10:55:46 +02:00 |
|
gpio_sam0.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_sam4l.c
|
treewide: Update clock control API usage
|
2023-04-05 10:55:46 +02:00 |
|
gpio_sc18im704.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_sedi.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_shell.c
|
drivers: gpio: shell: add vendor specific flags argument
|
2023-11-17 12:41:14 +01:00 |
|
gpio_sifive.c
|
drivers: gpio: sifive: remove unnecessary check
|
2024-01-19 15:13:53 +00:00 |
|
gpio_smartbond.c
|
drivers: gpio: smartbond: Add GPIO latching for PM
|
2024-04-25 16:17:53 +02:00 |
|
gpio_sn74hc595.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_stellaris.c
|
gpio: stellaris: implement gpio_pin_get_config
|
2023-07-26 08:16:44 +00:00 |
|
gpio_stm32.c
|
drivers: gpio: Add default for switch statement
|
2024-02-25 22:26:00 -05:00 |
|
gpio_stm32.h
|
drivers: pinmux: stm32: drop driver
|
2023-02-23 16:56:04 -05:00 |
|
gpio_stmpe1600.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_sx1509b.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_tca6424a.c
|
drivers: gpio: use gpio_is_ready_dt helper function
|
2023-08-28 08:48:35 -05:00 |
|
gpio_test.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
gpio_tle9104.c
|
drivers: gpio: split up driver for TLE9104 into a MFD
|
2024-04-09 11:07:27 +02:00 |
|
gpio_xlnx_axi.c
|
drivers: gpio: xlnx_axi: fix polling mode
|
2024-03-26 11:18:28 -05:00 |
|
gpio_xlnx_ps.c
|
drivers: gpio: xlnx_ps: fix up initialization priorities
|
2023-08-28 15:43:06 -04:00 |
|
gpio_xlnx_ps.h
|
drivers: gpio: xlnx_ps: Fix compiler warning
|
2022-08-20 11:32:37 -05:00 |
|
gpio_xlnx_ps_bank.c
|
drivers: gpio: expose gpio_utils.h to external GPIO drivers
|
2022-10-27 15:38:51 +02:00 |
|
gpio_xlnx_ps_bank.h
|
drivers: gpio: Xilinx PS MIO / EMIO GPIO driver
|
2022-03-15 08:44:46 -07:00 |
|
gpio_xmc4xxx.c
|
drivers: gpio: fix optional operations usage
|
2023-09-07 20:18:33 +02:00 |
|
Kconfig
|
drivers: gpio: add brcmstb gpio driver
|
2024-04-25 18:06:43 -04:00 |
|
Kconfig.ad559x
|
drivers: ad559x: add i2c bus support
|
2024-04-01 12:18:47 -05:00 |
|
Kconfig.ads114s0x
|
drivers: gpio: implement GPIOs in ADS114S08
|
2023-05-11 12:04:15 -04:00 |
|
Kconfig.altera
|
drivers: gpio: Add ALTERA PIO
|
2023-09-25 16:41:17 +02:00 |
|
Kconfig.ambiq
|
drivers: gpio: add Ambiq GPIO driver
|
2023-12-01 16:25:47 +01:00 |
|
Kconfig.andes_atcgpio100
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.axp192
|
drivers: mfd: gpio: adjust init priority
|
2023-10-26 09:50:31 +02:00 |
|
Kconfig.b91
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.bcm2711
|
drivers: gpio: Add GPIO driver for BCM2711
|
2023-10-24 11:03:44 +02:00 |
|
Kconfig.bd8lb600fs
|
drivers: gpio: split up driver for BD8LB600FS into a GPIO and MFD
|
2024-03-15 09:00:26 +01:00 |
|
Kconfig.brcmstb
|
drivers: gpio: add brcmstb gpio driver
|
2024-04-25 18:06:43 -04:00 |
|
Kconfig.cc13xx_cc26xx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.cc32xx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.cmsdk_ahb
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.creg_gpio
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.cy8c95xx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.davinci
|
drivers: gpio: Add Davinci gpio controller support
|
2023-08-31 10:31:37 +02:00 |
|
Kconfig.dw
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.efinix_sapphire
|
drivers: gpio: gpio_efinix_sapphire: initial version
|
2023-06-27 12:09:57 +00:00 |
|
Kconfig.emul
|
drivers/gpio emul: Fix reference to example overlay
|
2024-03-20 15:43:05 +01:00 |
|
Kconfig.emul_sdl
|
drivers: gpio: Add SDL emulated GPIO support
|
2022-10-03 10:12:03 +02:00 |
|
Kconfig.ene
|
drivers: gpio: initial device driver for ENE KB1200
|
2024-03-15 09:39:48 +00:00 |
|
Kconfig.eos_s3
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.esp32
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.fxl6408
|
drivers: gpio: fxl6408: Fix Kconfig dependency for log level config
|
2023-06-06 06:51:48 -04:00 |
|
Kconfig.gd32
|
drivers: gpio: gd32: add dependency on the EXTI
|
2022-11-09 06:26:41 -05:00 |
|
Kconfig.gecko
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.ifx_cat1
|
drivers: gpio: Add Infineon CAT1 GPIO driver
|
2023-03-01 11:44:57 +01:00 |
|
Kconfig.imx
|
drivers: all: imx: remove conditional support for pinctrl
|
2023-04-24 13:34:22 +02:00 |
|
Kconfig.intel
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.it8xxx2
|
ITE: drivers/gpio: Add gpio_ite_it8xxx2_v2 driver
|
2023-04-19 03:48:38 -04:00 |
|
Kconfig.litex
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.lmp90xxx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.lpc11u6x
|
drivers: gpio: remove pinmux dependency in lpc11u6x Kconfig
|
2022-10-11 08:25:46 -05:00 |
|
Kconfig.mchp_mss
|
drivers: gpio: add Microchip PolarFire SoC GPIO driver
|
2022-08-01 10:29:21 +02:00 |
|
Kconfig.mcp23s17
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.mcp23xxx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.mcux
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.mcux_igpio
|
drivers: all: mcux: remove conditional support for pinctrl
|
2023-04-24 13:34:22 +02:00 |
|
Kconfig.mcux_lpc
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.mcux_rgpio
|
driver: add new gpio driver "gpio_mcux_rgpio"
|
2024-01-16 20:50:11 -05:00 |
|
Kconfig.mmio32
|
|
|
|
Kconfig.nct38xx
|
drivers: mfd: gpio: adjust init priority
|
2023-10-26 09:50:31 +02:00 |
|
Kconfig.neorv32
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.npcx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.npm1300
|
drivers: mfd: gpio: adjust init priority
|
2023-10-26 09:50:31 +02:00 |
|
Kconfig.npm6001
|
drivers: mfd: gpio: adjust init priority
|
2023-10-26 09:50:31 +02:00 |
|
Kconfig.nrfx
|
modules: hal_nordic: nrfx: update API version to 3.2.0
|
2024-01-08 11:19:37 +01:00 |
|
Kconfig.numaker
|
drivers: gpio: support for Nuvoton numaker series GPIO
|
2023-06-21 09:26:00 +00:00 |
|
Kconfig.numicro
|
drivers: gpio: add driver for nuvoton numicro
|
2022-12-08 18:46:33 +01:00 |
|
Kconfig.nxp_s32
|
drivers: select nocache only when supported
|
2023-09-26 15:09:51 +02:00 |
|
Kconfig.pca95xx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.pca953x
|
drivers: gpio: pca953x: select I2C
|
2022-10-03 10:12:03 +02:00 |
|
Kconfig.pcal64xxa
|
drivers: gpio: add driver for PCAL6416A
|
2023-02-28 20:09:19 -05:00 |
|
Kconfig.pcf857x
|
drivers: gpio: PCF857x: Modify PCF8574 driver
|
2024-01-16 15:19:14 +00:00 |
|
Kconfig.psoc6
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.rcar
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.renesas_ra
|
drivers: gpio: Rename renesas ra driver
|
2024-01-29 11:32:46 +01:00 |
|
Kconfig.rpi_pico
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.rt1718s
|
driver: gpio: rt1718s: Add RT1718S GPIO driver
|
2022-11-28 10:48:53 +01:00 |
|
Kconfig.rv32m1
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.rzt2m
|
drivers: gpio: add rzt2m gpio driver
|
2023-11-15 11:41:35 +01:00 |
|
Kconfig.sam
|
drivers: gpio: sam: Fix Kconfig default for SAM4L
|
2022-07-26 08:49:38 +02:00 |
|
Kconfig.sam0
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.sc18im704
|
drivers: gpio: Add NXP SC18IM704 GPIO support
|
2023-04-03 20:02:51 +02:00 |
|
Kconfig.sedi
|
drivers: gpio: Add Intel SEDI gpio driver
|
2023-09-12 10:56:08 +02:00 |
|
Kconfig.sifive
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.smartbond
|
drivers: gpio: smartbond: Add GPIO latching for PM
|
2024-04-25 16:17:53 +02:00 |
|
Kconfig.sn74hc595
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.stellaris
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.stm32
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.stmpe1600
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.sx1509b
|
drivers: gpio: sx1509b: select I2C
|
2022-08-26 10:06:43 -07:00 |
|
Kconfig.tca6424a
|
drivers: gpio: Add TCA6424A driver
|
2022-11-18 10:10:11 +01:00 |
|
Kconfig.test
|
drivers: gpio: Cleanup Kconfig.test
|
2022-09-01 10:25:57 +02:00 |
|
Kconfig.tle9104
|
drivers: gpio: split up driver for TLE9104 into a MFD
|
2024-04-09 11:07:27 +02:00 |
|
Kconfig.xec
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.xlnx
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.xlnx_ps
|
drivers: gpio: Update drivers to use devicetree Kconfig symbol
|
2022-07-23 09:26:09 -05:00 |
|
Kconfig.xmc4xxx
|
drivers: gpio: Add xmc4xxx drivers
|
2022-08-05 13:00:21 +02:00 |
31baddaa51