Updated the files present in device_init, hfxo_manager, power_manager
and sleeptimer folder as per latest version of gecko_sdk.
Added SL_DEVICE_INIT_HFXO_PRECISION in sl_device_init_hfxo_config.
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
With the introduction of the SAI and EDMA drivers, there's
no longer a need to map the MMIOs using the mmu_regions.c
method since this is taken care of by the drivers via
device_map(). As such, remove entries for EDMA and SAI from
mmu_regions.c.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
It looks like all SoCs in tree check if an exception comes from an IRQ
the same way, so let's provide a common logic by default, still
customizable if the SoC selects RISCV_SOC_ISR_CHECK.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
use CONFIG_SOC_INTEL_ACE15_MTPM instead of CONFIG_ACE_VERSION_1_5.
CONFIG_ACE_VERSION_1_5 leaked from SOF.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add functions to Atmel SAM SoC PMC API. This is an effort to hide
most of the internal registers used in different SAM families.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The clock z_arm_platform_init hangs switching between clocks when using
MCUboot. This fixes the issue using the 8MHz internal clock as gclk_main
source when configuring PLL/DFLL.
Fixes: #67220
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The HAS_SPI_DW Kconfig is rather unncessary. If the synopsys designware
spi is to be included. It should come from the devicetree.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Some definitions were only used in soc.c, there's no need to expose them
in a public header like soc.h.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
<soc.h> is needed to pull some APIs defined in soc.h.
<fsl_device_registers.h> is needed to access EVENT0/1 addresses.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch enables time stamping controlled by DSP Timers / Time Stamping
logic on ACE1.5 / ACE2.0 platforms.
Signed-off-by: Tomasz Lissowski <tomasz.lissowski@intel.com>
The soc.c interrupt-related definitions are supposed to
provide support for multi-level interrupts. At the moment,
the way the functions work is they only process the LEVEL 1
interrupt from the encoded INTID and treats the provided INTID
as if it were simply a LEVEL 1 interrupt, which is wrong. Another
issue with soc.c is the fact that the definitions from it clash
with the ones provided by the IRQSTEER driver. To fix this, remove
the soc.c file altogether and change the corresponding CMakeLists.txt
to only contain the necessary statements.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
With GCC 12.3 and binutils 2.40, the build fails with:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S: Assembler messages:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:51: Error: junk at end of line, first unrecognized character is `n'
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:133: Info: macro invoked from here
Because the SOC_ON_EXIT_CPU_IDLE macro puts all the statements on a
single line, there must be a semicolon after .rept
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Since it takes 400 bytes of code and it is rarely used disable
by default this feature.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If CONFIG_LEGACY_CLIC is disabled, i.e. we adhere to the current CLIC
spec, the mode bits of mtvec have to be 0x3. Everything else is
reserved. Therefore if CONFIG_RISCV_VECTORED_MODE is enabled, the
current implementation is correct. If CONFIG_RISCV_VECTORED_MODE is
disabled, the mode bits have to be set, too.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
Add support of voltage control to Renesas PFC driver. Voltage register
mappings have been added to r8a77951 and r8a77961 SoCs.
Allow 'power-source' property for 'renesas,rcar-pfc' node. This property
will be used for configuring IO voltage on appropriate pin. For now it
is possible to have only two voltages: 1.8 and 3.3.
Note: it is possible to change voltage only for SD/MMC pins on r8a77951
and r8a77961 SoCs.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Setting IT8XXX2_EGPIO_EEPODD bit will disable EGAD pin output driving
to avoid leakage when GPIO E1/E2 on it82002 are set to alternate
function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When exiting power gated state, call the CPU start function
passed to arch_start_cpu().
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Clock DMIC0 from the audio PLL when DMIC driver class is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Use 'switch' to emphasise that we're handling different values of
'state' in pm_state_set().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
'ret' in pm_state_set() is always set before it's used, no need to
initialise it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add RGPIO gpio driver. This driver is used for i.MX93 and i.MX8ULP.
GPIO pinctrl, read/write and interrupt is supported. Runtime mmio
configuration is enabled, so no need for region definition in
mimx9/mmu_region.c
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
pm_device_runtime_get() must be called after pd_intel_adsp_init() is
called for each device, because the latter calls
pm_device_runtime_enable(), which sets the device runtime PM use
count to 0. The current wrong calling order causes a DSP panic
because of an unbalanced pm_device_runtime_put(). Fix this by
delaying pm_device_runtime_get() until the POST_KERNEL initialisation
step.
Fixes commit c3a6274bf5 ("intel_adsp: ace: power: Prevent HST
domain power gating")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Now that:
1 - LS Clocks sources values are identical accross series
2 - We're able to extract this value from device tree
define STM32_LPTIM_CLOCK choice symbol from device tree
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
For a CLIC the vector table has to be aligned by 512 bytes, if there are
between 65 and 128 interrupts, which is the case for the gd32vf103.
`isr_wrapper` has to be aligned to 64 bytes, s.t. the lower 6 bits of
mtvec are 0.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
For a proper initialisation, the soc-specific `__nuclei_start` has to
be executed before the common `__start`. To ensure that `__nuclei_start`
is linked first, I added the linker section init.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
A lot of the entry.S is again implemented in common/vector.S.
I removed everything redundant and changed the jump to the common
symbol __start at the end.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
.bss and .data are uncached in Zephyr builds for intel_adsp. No need
to try to manipulate cache of objects in those sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead of custom SOC_MCAUSE_EXP_MASK definition. Note that SoCs
selecting RISCV_PRIVILEGED already used such config indirectly (see
changes in soc_common.h).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The MCAUSE register has the "Interrupt" flag defined defined at XLEN-1
position (31 for 32-bit, 63 for 64-bit). This is not an SoC specific
option, and there's no need to expose it publicly.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
As defined in Table 3.6 of "The RISC-V Instruction Set Manual, Volume
II: Privileged Architecture". Delete all spread definitions of the same,
weirdly prefixed with "SOC".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Commit 447a492 switched to `sys_cache*` to enable caches at SoC init. To
preserve the old behavior of enabling caches at init, is missing to
select `CONFIG_CACHE_MANAGEMENT`.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Because it was exclusively used by the "common" RISC-V privileged code
to build CPU idle routines that are now handled by arch level code.
Also, all platforms defaulted to "y", making it pointless in practice.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Since d992683db5 (soc: arm: replace redundant config option for
caches for nxp_imx), RT1xxx series will not have cache enabled at boot
unless CONFIG_CACHE_MANAGEMENT=y. Since this will improve performance,
enable CONFIG_CACHE_MANAGEMENT by default.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch enhances the power-down sequence for the HOST (HST) domain
within the Intel ADSP ACE 1.5 architecture. It introduces a check to
ensure that a specific condition, represented by a magic key value, is
met before disabling the HST domain. This additional verification step
ensures that the HST domain is only powered down when it is safe to do
so, thereby maintaining the stability and reliability of the system.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch introduces power management for the HOST (HST) domain within
the Intel ADSP ACE IP. It adds macros to access the node identifier and
device pointer for the HST power domain and integrates power management
calls into the system initialization and power state transition
functions.
The patch ensures that power gating of the HST domain is prevented when
the primary core of the audio DSP is active. Preventing power gating is
crucial for maintaining the functionality of the HST domain while the
primary DSP core is performing critical tasks.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Gigadevice was inconsistent with the convention established by other SoC
families, that is, use <vnd_prefix>_<family>. For example, ST STM32 uses
st_stm32. Note that GD32VF103, under soc/riscv, has already been
adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use sys_cache* functions to enable the caches for stm32f7 and
stm32h7. This ensures that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use the sys_cache* functions to enable the caches on same70 and
samv71. This will ensure that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove the redundant cache config options for kv5x and use
the sys_cache* functions to enable the caches. This will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Replace the redundant cache config options for the nxp_imx and
use sys_cache* functions to enable the caches. These will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use sys_cache* for enabling the caches in nxp_s32. This automatically
considers CONFIG_CACHE_MANAGEMENT and will activate the
cases only if this is active.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
This option is no longer needed, all SoCs have been moved out from
soc/riscv/riscv-privileged folder.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Reorganized as follows:
- Created a new SiFive Freedom family
- Created 3 new series: E300/E500/E700
- Created Socs within each series (e.g. E340)
Also moved out of riscv-privileged folder.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Merge both series into a new family: microchip_miv [1], moving them out
of riscv-privileged. Updated naming to stay closer to what vendor
announces on their website.
[1]: https://www.microchip.com/en-us/products/fpgas-and-plds/
fpga-and-soc-design-tools/mi-v
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Move out of riscv-privileged and convert to a standalone SoC. Note
that the family/series structure has been dropped in favor of a single
SoC (what NEORV32 seems to be).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Move things out from riscv-privileged, and create the new RISC-V GD32
family. New family folder follows the <vnd>_<family> naming convention.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Reorganize following the hierarchy found in the vendor website [1]:
- SoC Family: Telink TLSR
- SoC series: TLSR951X
- SoC: TLSR9518
Also split out from riscv-privileged folder. Note that B91 was the name
of a starter kit [2].
[1]: http://wiki.telink-semi.cn/wiki/chip-series/TLSR951x-Series/
[2]: https://wiki.telink-semi.cn/wiki/Hardware/
B91_Generic_Starter_Kit_Hardware_Guide/
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
So that SoCs can be ported outside of riscv-privileged folder, setting
their own family name. This will be removed once all SoCs are ported.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Introduce a new arch level Kconfig option to signal the implementation
of the RISCV Privileged ISA spec. This replaces
SOC_FAMILY_RISCV_PRIVILEGED, because this is not a SoC specific
property, nor a SoC family.
Note that the SoC family naming scheme will be fixed in upcoming
commits.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The header is common to all Nuclei based cores (not strictly related to
RISCV privileged spec). Since only GD32VF103 uses a Nuclei core, move
the file to its SoC folder.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a new riscv/common directory where to store common code between
SoCs, e.g. those implementing the privileged spec.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
S32K1xx devices have a maximum of 3 FlexCAN peripherals. Each part may
define a different maximum number of instances and message buffers,
hence the interrupt lines are defined in the part specific dts.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Adds common thread-local-storage.ld provided
by Zephyr. This also fixes a wrong xtensa_core entry
that should be riscv_core.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When Power Management is enabled (CONFIG_PM=y),
the CONFIG_IDLE_STACK_SIZE of 320 is not enough :
Increase its size to 512.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The defconfig.series file for the stm32f4 incorrectly redefines
the PM Kconfig in order to select two dependencies, COUNTER and
COUNTER_RTC_STM32_SUBSECONDS, instead of setting a default for
them if PM is included.
This commit fixes the error described above.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Currently SOF has disabled CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE option and
use pm_suspend_devices() to suspend and resume IPC device during D3
power flow. The pm_suspend_devices() function skips suspending devices
that are busy. In very rare cases, the IPC device is busy during the
power state transition, which results in the device not being restored
during reboot. This happens when FW sends a message to the HOST and
waits for ACK, and the HOST simultaneously sends a SET_DX message to the
DSP. This suspend/resume logic in IPC driver does not work well when the
system enters the D3 state because it is not a suspend state, but rather
a power-off. IPC does not require suspending, only reinitialization when
exiting D3. We cannot avoid this one missing ACK and it cannot block the
DSP from turning off.
When FW receives a SET_DX message it checks whether it can enter the D3
state and then returns an error (via IPC) or calls the pm_state_force
function. Success response is sent directly from power_down assembly and
not via ipc driver. This is because after receiving the response, the
HOST will turn off the DSP.
In order for the transition to D3 to take place, only the primary core
can be active, all pipes must be stopped (and therefore all modules in
FW). The only active thread at this time is the Idle thread. Driver on
the host will not send another ipc because is still waiting for
response. FW can try to send only two notification:
- FW exception: from this place there is no return to continue the power
transition,
- log buffer status: skipped, they remain in the queue without being
sent.
I'm moving pm_device_busy_clear(dev) from IRQ handler to
intel_adsp_ipc_send_message function so the pending ACK does not block
power transition.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Give option in soc.c to initialize the MIPI DPHY clock from the default
AUX1_PLL, or from the FRO using CONFIG_MIPI_DPHY_CLK_SRC_FRO.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
HDA DMA driver uses an excessive value of 128 bytes as required alignment
for DMA buffer size. This may result in the correct buffer size (e.g.
32-byte aligned, which is DT-compliant) being silently truncated before
writing it into DGBS register. This patch changes the requirement to the
value implied by DGBS register format (effectively reduces to 16 bytes).
Signed-off-by: Tomasz Lissowski <tomasz.lissowski@intel.com>
The previous implementation of the sys_arch_reboot function
for the Atmel SAM series was using NVIC_SystemReset.
This caused a reboot time of around 20 seconds on a SAM4SA16CA,
which is now reduced by directly writing to the
reset controller control register (RSTC_CR).
Signed-off-by: Jaro Van Landschoot <jaro.vanlandschoot@basalte.be>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Adopt the "MMU_REGION_DT_FLAT_ENTRY" macro to automatically generate
elements in "mmu_regions" according to devicetree "compatible" and
"status".
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Adopt the "MMU_REGION_DT_FLAT_ENTRY" macro to automatically generate
elements in "mmu_regions" according to devicetree "compatible" and
"status".
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
QEMU MMU tracing showed that there might be something wrong with
its Xtensa MMU implementation, which result in access violation
when running samples/userspace/hello_world_user.
Here is the MMU trace from QEMU from failed runs:
get_pte: autorefill(00109020): PTE va = 20000424, pa = 0010c424
get_physical_addr_mmu: autorefill(00109020): 00109000 -> 00109006
xtensa_cpu_tlb_fill(00109020, 1, 0) -> 00109020, ret = 0
xtensa_cpu_tlb_fill(00109028, 1, 0) -> 00109028, ret = 0
xtensa_cpu_tlb_fill(00109014, 0, 2) -> 00103050, ret = 26
The place where it fails is during reading from 0x109014.
From the trace above, the auto-refill maps 0x109000 correctly
with ring 0 and RW access with WB cache (which should be correct
the first time under kernel mode). The page 0x109000 is the libc
partition which needs to be accessible from user thread.
However, when accessing that page, the returned physical address
became 0x103050 (and resulting in load/store access violation).
We always identity map memory pages so it should never return
a different physical address.
After forcing TLB invalidation during page table swaps, the MMU
trace is:
get_pte: autorefill(00109020): PTE va = 20000424, pa = 0010c424
get_physical_addr_mmu: autorefill(00109020): 00109000 -> 00109006
xtensa_cpu_tlb_fill(00109020, 1, 0) -> 00109020, ret = 0
get_pte: autorefill(00109028): PTE va = 21000424, pa = 0010e424
get_physical_addr_mmu: autorefill(00109028): 00109000 -> 00109022
xtensa_cpu_tlb_fill(00109028, 1, 0) -> 00109028, ret = 0
get_pte: autorefill(00109014): PTE va = 21000424, pa = 0010e424
get_physical_addr_mmu: autorefill(00109014): 00109000 -> 00109022
xtensa_cpu_tlb_fill(00109014, 0, 2) -> 00109014, ret = 0
xtensa_cpu_tlb_fill(00109020, 0, 0) -> 00109020, ret = 0
Here, when the same page is accessed, it got the correct PTE
entry, which is ring 2 with RW access mode (but no cache).
Actually accessing the variable via virtual address returns
the correct physical address: 0x109014.
So workaround that by forcing TLB invalidation during page swap.
Fixes#66029
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need for this config here and it is messing
with total sys heap calculation.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add SOC definition for MK22F12 series, larger LQFP-144 K22 series
parts that feature additional peripheral instances.
Additionally, these parts differ from the standard MK22 in the following
ways:
- SYSMPU peripheral is present, so an MPU definition is required
- No external oscillator divider is present
This commit also updates the NXP HAL to include pin control files for
these SOCs.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Supporting Stop1 mode while BLE RF is enabled requires some specific
adaptation and usage of STM32WBA Cube BLE controller scm API.
scm (Secure clock manager) is in charge of switching clock depending
on RF status and should be informed of PM stop modes scheduling.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32WBA controller uses a PKA driver to perform cyphering operations
on keys. Since PKA hardware block requires RNG clock to be enabled, a
synchronization with zephyr RNG driver is needed.
Use RNG enable status to check if RNG could be switched off or needs to
be switched on.
Similarly in entropy driver, don't cut RNG clock if PKA is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to enable BLE support on STM32WBA, following APIs are implemented:
- HostStack_: BLE Controller scheduling
- ll_sys_: Link layer API required for scheduling
- UTIL_TIMER_: BLE Controller timer utility
- LINKLAYER_PLAT_: BLE controller utilities
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The DC233C core has support for both i-cache and d-cache.
So mark it as such so we can test caching of Xtensa in QEMU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Definition of ADSP_FORCE_DECOUPLED_HDMA_L1_EXIT_BIT,
which is used in the intel_adsp_force_dmi_l0_state function,
is missing.
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
Currently on zephyr, RAIL library is used only by Bluetooth applications,
with this update, it will be able to be used for sample applications
for custom radio phys.
All files were copied from Silicon Labs GSDK v4.2.4.
Signed-off-by: Zoltan Havas <zoltan.havas@silabs.com>
The STM32F722 is similar to the STM32F723, but lacks the latter's
more advanced USB PHY. Otherwise, they are virtually identical.
Signed-off-by: Evan Perry Grove <evan@4grove.com>
Separating two new functions force and allow l1
to have the current state with separated functions
in the ipc file so that SOF can call these
functions via IPC DMI_FORCE_L1_EXIT. Change related
to the addition of a new parameter to force
DMI L1 exit on IPC request.
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
This gets rid of the z_ prefix.
Note that z_xt_*() are being used by the HAL so they cannot be
renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This follows the idea to remove any z_ prefix. Since MMU has
a large number of these, separate out these changes into one
commit to ease review effort.
Since these are no longer have z_, these need proper doxygen
doc. So add them too.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Header files under arch/xtensa/include are considered internal
to architecture. There is really no need for two places to
house architecture internal header files.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simply to provide some consistencies on file naming under
arch/xtensa.
These are all internally used files and are not public.
So there is no need to provide a deprecation path for
them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch enables DSP clock gating for ACE platforms. By default, clock
gating is blocked by the firmware in the hardware configuration. If
CONFIG_ADSP_IDLE_CLOCK_GATING is enabled, this prevent is not active and
clock can be gated when core is in idle state. WIth this option disabled
clock gating will only be enabled in hardware during power gating.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
The STM32 G4 series has a built-in Arm Instrumentation Trace
Macrocell. Set CONFIG_HAS_SWO to enable this.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Configure the SYS_CLOCK_TICKS_PER_SEC directly from the
DTS st-prescaler property of the lptim node
aka stm32_lp_tick_source
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The instruction cache in the STM32F7 and H7 was enabled regardless
of the value assigned via Kconfig to the CONFIG_ICACHE parameter.
This commit adds the missing conditional checks; note that this does
not affect the compiled behavior unless CONFIG_ICACHE is explicitly
disabled by the user.
Remove a redundant low-level check on DCache being already enabled,
since it is also performed inside the SCB_EnableDCache function.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Use the already available in the tree mechanism of adding assembly
instructions right after WFI/WFE to implement the workaround for
nRF5340 anomaly 168 (replace the 4 NOP solution used on the network
core as it turned out to be insufficient) and provide two related
Kconfig options so that users are able to adjust the workaround to
their actual needs (disable it entirely or use it in the extended
version).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds definitions for the nRF9151,
which is software-compatible with nRF9161.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Enable the TF-M NS storage partition for nordic boards.
This partition is otherwise not used, and configured as secure.
Fixes: #59376
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently Code Cache cannot be enabled because its initialization is
guarded by Kconfig options which depend on CPU core cache support,
but S32K14x devices has a SoC specific L1 cache controller. Hence,
introduce a SoC-specific symbol to enable Code Cache.
Note that the cache controller is not available for S32K11x devices.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update the Kconfig for the npcx eSPI driver so it's automatically
enabled if the devicetree node is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
Microchip's PolarFire SoC (MPFS) has 186 available interrupts.
Fix the Kconfig symbols.
While we're at at: remove commented out code
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
GCLK Gen 2 was dedicated to USB, but never setup... this patch
configures it for 48 MHz, derrived from DFLL.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Following changes in #64978, align CPU_HAS_xCACHE symbols with
the CMSIS feature definitions in the device headers so that
both have the same value.
Fixes#66147
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Some SoC have missing feature selections in their Kconfig.
Some others are missing includes of CMSIS-Core headers.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Caches are optional on cortex-m7, having CPU_HAS_*CACHE in CPU_CORTEX_M7
definition renders them mandatory.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This changes remove extraneous includes causing issues with cycles in
includes subsequently having code requiring definitions from CMSIS
while it’s configuration hasn’t completed yet.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Introduce support for NXP S32K1 family of 32-bit MCUs, and
particularly for S32K146 devices. S32K1 share a fair amount of
similarities with Kinetis family, so most of the peripheral drivers
can be reused.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
In an earlier commit, the riscv-privileged level implementation of
`arch_cpu_idle()` is not included unless `CONFIG_RISCV_HAS_CPU_IDLE` is
enabled.
This commit ensures the option is enabled on all the existing CPUs, thereby
maintaining the existing behavior.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
The current configuration comes with a common implementation of
`arch_cpu_idle()` for the whole riscv-privileged family, utilizing the
`WFI` instruction to place the CPU into a light sleep state, with the
assumption that it will be awakened later by interrupts such as SYSTICK.
However, this approach is not always effective, particularly in scenarios
where the SYSTICK is not a valid wake source.
This commit uses `CONFIG_RISCV_HAS_CPU_IDLE` as the build condition of the
family-level `idle.c`, allowing CPUs that do not enable this option to
fallback to a generic arch-level implementation in
`arch/riscv/core/cpu_idle.c`.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Reset cause reason was not initalized properly, making
hwinfo feature not to work as expected.
Fixes#65634
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
There are symbols are both defined by the NXP S32 HAL and
the CMSIS RTOS V2 wrapper, to avoid interference between
them, redefine the symbols under an enum.
Also this is may a common issue for all NXP S32 platforms,
move to common place to be reused
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
introduce global DSP_SHARING and CPU_HAS_DSP to be used by all
architectures and change existing usage in ARC to use those global
configs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
r8a779f0 SoC is part of the Renesas R-Car Gen4 SoC series.
This SoC has a dual core lockstep Cortex-R52 CPU.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Renesas R-Car Gen4 is different from Gen3 regarding pinmux.
While Gen3 had only one base address to manage all pins,
Gen4 has one set of pinmux registers per GPIO banks.
We could expose one pinmux register per GPIO controllers,
but that would break potential compatibility with Linux
Device tree.
Instead create a reg_base array to parse all reg base from
device tree and identify proper base address based on the pin
definition.
This imply to add a pfc_base parameter to most of the pfc_rcar
function.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
The original SHI module only has one output FIFO buffer. It costs a lot
when the driver has to send/change the protocol control code because it
must fill out all 128 bytes of output FIFO. In npcx4, we introduce
another output buffer in 1-byte depth. These two buffers can switch back
and forth during the transaction. We can use the single-byte buffer
to send the control code and the 128-byte FIFO to send the data payload.
It helps improve the SHI driver's efficiency.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Secondary dsp is idle and waiting for interrupt before it is totally
halted. The other active cores can trigger idc interrupt to this core,
this can wake it up and result to fw panic. Mask idc interrupt as timer
interrupt to prevent this case.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Annotate posix_exit() and nsi_exit() as noreturn
mainly to ease the life of static analysis tools.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Andy Ross re-implementation of MMU layer with some subtle changes,
like re-using existent macros, fix page table cache property when
direct mapping it in TLB.
From Andy's original commit message:
This is a reworked MMU layer, sitting cleanly below the page table
handling in the OS. Notable differences from the original work:
+ Significantly smaller code and simpler API (just three functions to
be called from the OS/userspace/ptable layer).
+ Big README-MMU document containing my learnings over the process, so
hopefully fewer people need to go through this in the future.
+ No TLB flushing needed. Clean separation of ASIDs, just requires
that the upper levels match the ASID to the L1 page table page
consistently.
+ Vector mapping is done with a 4k page and not a 4M page, leading to
much more flexibility with hardware memory layout. The original
scheme required that the 4M region containing vecbase be mapped
virtually to a location other than the hardware address, which makes
confusing linkage with call0 and difficult initialization
constraints where the exception vectors run at different addresses
before and after MMU setup (effectively forcing them to be PIC
code).
+ More provably correct initialization, all MMU changes happen in a
single asm block with no memory accesses which would generate a
refill.
Signed-off-by: Andy Ross <andyross@google.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add soc power management for the STM32F4x chips.
One low power state is added supported by all chips from the family -
the Stop mode with voltage regulator in low-power mode.
The Stop mode for STM32F chips has to work with the IDLE timer -
CORTEX_M_SYSTICK_IDLE_TIMER, because PLL and HSI are disabled in the
Stop mode (Systick is not clocked). The only possible wakeup source is
RTC, which works as a IDLE timer for the Systick.
The exit latency may need to be adjusted per system, depending on the
system tick frequency and other variables.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This commit moves configuration of hfxo from headers defined on board level
to device trees of SoCs.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Some workarounds were introduced for intel cavs2.5 platform bring up.
It is not general so move them to platform code.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Cavs platforms starts from Apllolake to Raptorlake. Some of them need some
workaround for arch_cpu_idle so create a bespoken one. Each workaround is
configured by kconfig setting.
Signed-off-by: Rander Wang <rander.wang@intel.com>
The xtensa/nxp_adsp_imx8m linker script is missing
the necessary include statements for linker snippets.
So we need to add them.
This fixes compile warnings like: orphan section `.unstable_id'
from `modules/chre/lib..__modules__lib__chre__platform__zephyr.a
(version.cc.obj)' being placed in section `.unstable_id'.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add _heap_sentry value to fix build errors for
newlib, like: "undefined reference to `_heap_sentry'"
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
When linking, in crtbegin.o for C++ exception support, we pull in
the .tm_clone_table section.
Update the linker scripts to handle this, otherwise we get a
"warning: orphan section `.tm_clone_table'".
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Remove platform.h since is no longer used for SOF.
Move memory.h to include folder and modify the linker
to reflect this.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The SoC header already includes the necessary device headers for
all SoC variants supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
To simplify the inclusion of device headers in common code for
NXP S32 devices, make sure all SoCs are including their respective
device headers. This PR adds the missing headers for S32Z/E.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add alias "FEATURE_SIUL2_MAX_NUMBER_OF_INPUT"
for compatibility with with previous RTD versions.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Currently, the NXP S32 SoCs have three redundant Kconfig hidden
options to define the part number. To streamline this, we will
retain `CONFIG_SOC_PART_NUMBER` to store the part number as a
string and `CONFIG_SOC_PART_NUMBER_<part>` that can be selected
by the boards.
Furthermore, for drivers requiring conditional code compilation
based on the target SoC, they should utilize the series or SoC
config option as applicable, instead of the part number config.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The existing S32K3 Kconfig options employ the `M7` suffix, which is
redundant given that all cores in this series utilize an Arm Cortex-M7
core. Therefore, we should remove it.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
To accommodate support for S32K1 devices, it is necessary to rename
the existing `s32k` directory, which currently houses support for
the S32K3 series, to align with the respective series names. This
adjustment is necessary given the distinct differences in core
architecture, MPU, peripherals, and other key aspects between
the two series.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
CPU_HAS_NRF_IDAU is depending on SOC_SERIES_NRF91X and
SOC_NRF5340_CPUAPP.
This makes it more difficult to have an out-of-tree nrf SOC.
It is also an unnecessary dependency. There is no prompt for
CPU_HAS_NRF_IDAU, so it will not show up in menuconfig and it won't be
possible to enable it from a users Kconfig fragment.
The only way to enable it is to select it, and those that select this
option can themselves make sure that they only do so when appropriate.
Also, move NRF_SPU options out to SOC Kconfig files to also make
out-of-tree SoCs possible. With the added benefit of not polluting the
common soc/arm/Kconfig.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This adds a new driver for Renesas RZ/T2M.
The driver allows configuration of pin direction,
pull up/down resistors, drive strength and slew rate,
and selection of function for a pin.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
This adds a new SoC: SOC_RENESAS_RZT2M
and a new board: rzt2m_startek_kit
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
Co-authored-by: Roman Dobrodii <rdobrodii@antmicro.com>
This allows XIP to be disabled for applications that execute in
RAM, which do not need XIP support from flash
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add support for mipi_dsi_detach API to dsi_mcux_2l driver, and
update RT5xx SOC interface to enable halting clocks for the MIPI DPHY.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
i.MX93 share similiar register layout with i.MX RT11xx. Change ccm driver
to align with i.MX RT11xx, and make it easier to enable other drivers.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Enable NXP FlexRAM in DTS and SOC code.
Do not configure flexram at runtime if the code is in the RAM.
Fix RT1060 DT to be more accurate.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Other drivers like the pinctrl_ti_k3 rely on a fully initialized system.
Move the am62x_init to an earlier stage than PRE_KERNEL_1 to keep both
PRE_KERNEL_{1,2} free for drivers.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
- Make caparray delta a Kconfig variable
- Set caparray delta for beagle_bcf at beagleconnect_freedom_defconfig
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
As the name suggests, this commit attempts to cleanup some
of the configurations for the i.MX8 series. This cleanup
consists of either relocating the configuration or removing
unnecessary configurations.
As a rule of thumb, SoC-specific configurations have been moved
to Kconfig.series. If the configuration is by default 'y' and
needs to be set to 'n' or it has a numeric value then it has
been moved to Kconfig.defconfig.series. Configurations that
are default 'n' and were also explicitly set to 'n' have been
removed. Also, enabling logging has been moved to the board
level to avoid having to force all boards based on the same
SoC to enable logging.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit attempts to clean the memory.h header by doing
the following changes:
1) Change the include guard to the standard
ZEPHYR_....
2) Remove unused macro definitions.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Since platform.h is a SOF-specific header that's no
longer used there's no point in keeping the include/soc directory.
As such, move memory.h to include/ and modify the linker script
to reflect this location change.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit attempts to split the generic i.MX8 SoC into its
QXP and QM variants. As things are now, the i.MX8 SoC doesn't
have any NXP HAL files to back it up. As a consequence, the
native Zephyr drivers cannot be used.
To solve this issue, the generic i.MX8 has been split into
i.MX8QXP and i.MX8QM, each of them having different NXP HAL
files.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Most of the public APIs in `riscv_plic.h`
(except `riscv_plic_get_irq` & `riscv_plic_get_dev`) expect the
`irq` argument to be in Zephyr-encoded format, instead of the
previously `irq_from_level_2`-stripped version. The first level
IRQ is needed by `intc_plic` to differentiate between the
parent interrupt controllers, so that correct ISR offset can be
obtained using the LUT in `sw_isr_common`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
NXP USB bindings were combined into one binding and using
a property corresponding to HAL enums which is improper use
of devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This CL is to minimize `CONFIG_SOC_SERIES_XXXX` definitions when we
introduce a new chip series. Most of them are relevant to register
layouts in different npcx soc series. It moves soc-specific register
definitions from `reg_def.h` to its own soc.h file.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add a property for I2C channel switch selection. This property will
write to the SMBxxCHS register according to the I2C node you selected,
which can make channel swapping.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fix cmake depreciation warning on pre-defined linker.id
(soc/arm/renesas_ra/ra4m1/linker.ld) used for arduino_uno_r4_minima.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Allow user to disable CONFIG_ADJUST_DCDC for their board, rather than
selecting it at the SOC level. The symbol still defaults to enabled,
preserving existing behavior unless a user explicitly chooses to disable
it.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics.
Note that for some peripheral instances is needed to define the
HAL macros of the peripheral base address because there are gaps
in the instances or there are SoCs with a single instance.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Several paths are checked for existence before added as global Zephyr
include path.
The existence check was needed because some tooling emit warnings on
non-existing paths.
Only few SoCs are using those pre-defined paths, yet this code runs
for all SoCs. The principle originates back from Kbuild days, and with
CMake it's more common and generally more visible to let the CMake code
defining libraries to specify include paths.
Furthermore it appears that several SoC implementation following the
<soc-path>/include was unaware that the path would be automatically
added as include path, cause they contain lines like:
zephyr_library_include_directories(include)
Remove pre-defineds path except the `<SOC_PATH>` path, which is
guaranteed to exists.
This simplifies the CMake logic in the top-level Zephyr CMakeLists.txt
file.
This cleanup further prepares for future work where SoCs need not to
be organised under architectures which is important for multi-arch SoCs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduce 'USE_SWITCH' feature into cortex-A/R(aarch32)
architecture
For introducing USE_SWITCH, the exception entry and exit are unified via
`z_arm_cortex_ar_enter_exc` and `z_arm_cortex_ar_exit_exc`. All
exceptions including ISR are using this way to enter and exit exception
handler.
Differentiate exception depth and interrupt depth. Allow doing
context switch when exception depth greater than 1 but not allow doing
this when interrupt depth greater than 1.
Currently, USE_SWITCH doesn't support FPU_SHARING and USERSPACE.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This is support for AArch64 development board.
The board uses 4-core Cortex-A55, which are based on
the ARMv8.2 architecture.
In addition,we support smp support and
it can use 4-cores to run basic samples.
Signed-off-by: Charlie Xiong <1981639884@qq.com>
Commit c6e3bac4f changed the core clock frequency of LPC55XXX series.
That clock is used by the cortex-m systick timer, which is the
default timer used for system time in zephyr on this series.
The bug is that the config SYS_CLOCK_HW_CYCLES_PER_SEC default was not
updated on the affected platforms to account for this change, so system
time is currently recorded as 150% of reality. Fix this by changing the
kconfig to be set automatically at SOC level and remove board defaults.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
For this SoC, an additional section is conditionally included on top of
the default linker script for Cortex-M. Set `SOC_LINKER_SCRIPT` to the
local `linker.ld`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
